115V AC Power Supplies

The ION Platform is an intelligent, high-density, multi-protocol system supporting a variety of network interface devices. Designed for both carrier class and enterprise network applications where multiple points of fiber integration and secure network management of the fiber interface devices is essential. NDAA Compliant, TAA Compliant.The system can be made redundant with the use of a second power supply..A single power supply can be used to power all the devices installed in the chassis.The ION 19-slot chassis can support up to two power supply modules which mount in the rear of the chassis.

An alternate 650W AC Power Supply Unit (PSU) which has similar specification as the existing C9K-PWR-650WAC-R has been developed for Cisco Catalyst 9500 Series Switches. This alternate PSU has been fully tested and qualified with Cisco Catalyst 9500 Series Switches that support 650W AC PSU. This PSU will have the same Product ID (PID) as the existing C9K-PWR-650WAC-R..Alternate power distribution unit for Cisco Catalyst 9500 Series switches.Input: 7.6A at 90 - 132VAC@60Hz, or 3.65A at 180 - [email protected] in-rush current 11A.Maximum input volt Amperes: 760VA at 100VAC.Maximum output power per power supply: 650W

STARTECH.COM® 5-15 8 Outlet 15 A 120 V Power Distribution Unit delivers a cost-effective power distribution solution for your server rack/cabinet. The 1U PDU can be mounted horizontally in any server rack 19 in depth or greater, to provide eight 120V 15A power ports/outlets, and features a rugged steel casing to ensure maximum durability. The front of the PDU features two LEDs to indicate proper ground and surge detection while enabling you to control the power state with an illuminated power/reset switch. To prevent costly breakdowns of connected devices, the rackmount PDU features a built-in circuit breaker and reset switch, ensuring dependable performance of vital equipment..6 ft 15 A 120 V input.120 V 60 Hz output.8 NEMA 5-15 outlet connector.1U rack mount.Package includes 1 - 8 port power distribution unit, 1 - installation document.Maximum 15 A total current draw per phase.Solid steel chassis for durability.LED indicators for ground and surge detection.Illuminated reset and power switch.Meets ANSI/EIA RS-310-D standards.Built in circuit breaker.Indicator type (led): 1 - ground, 1 - surge.Regulatory derated input current (north America): 12 A.Applications: 16 easily accessible power outlets in a compact 1U of rack space, Localize the power control for all of your connected system.Certification: RoHS compliant, UL listed.4.5 lbs.1.7"(H) x 19"(W) x 3.8"(D).2 years warranty.STARTECH.COM® 5-15 8 Outlet 15 A 120 V Power Distribution Unit is made of rugged steel casing, and built in circuit breaker to ensure maximum durability.

This 1U rackmount power distribution unit (PDU) provides unfiltered power distribution to 10 NEMA 5-15 receptacles from a UPS system, generator, or utility power source. Designed for electrically demanding IT or industrial environments, the CPS1215RM has durable metal housing and network-grade plugs and outlets. A 15-foot AC power cord allows the PDU to be placed where it's needed and a cord retention tray secures power cords, keeping them organized and accessible. The CPS1215RM Basic PDU also comes with a three-year warranty..Rack Mountable (1U) PDU that delivers AC power to servers, equipment, and connected devices..Input voltage: 120 VAC, 50Hz/60Hz.Power capacity: 1.8 kVA, 15-Amp electrical capacity with circuit breaker.Product Dimensions are 17.25"W x 1.75"H x 4.75"D with a Cord Length of 15 ft (4.5 m)..This PDU has a Nominal Input Voltage of 100 VAC - 125 VAC and uses an input plug type NEMA 5-15P..Output voltage: 120 VAC (60 Hz)Plug/connector type: NEMA 5 15P straight, Receptacles: 10 x NEMA 5 15R (Output).Meets or exceeds UL & RoHS.Provides shielding against electromagnetic interference & radio frequency signals. Most commonly, this is used to prevent line noise or humming that occurs over telephone lines or stereo electronics.Warranty: 3 Year Limited Warranty.Compatibility: PC.Certifications and standards: UL, RoHS.Includes: CPS 1215RM unit, warranty card/manual.Weight: 4.90 lbs..Deliver reliable power to multiple devices with the CPS1215RM Basic PDU from CyberPower, your trusted ally in power.

Cisco Catalyst 9300 series switches are Cisco's lead stackable enterprise access switching platform and as part of the Catalyst 9000 family, are build to transform your network to handle a hybrid world where the workplace is anywhere, endpoints could be anything, and applications are hosted all over the place. The Catalyst 9300 series, including the new Catalyst 9300X models, continues to shape the future with continued innovation that helps you reimagine connections, reinforce security and redefine the experience for your hybrid workforce big and small..1100W power to port AC power supply for use in Cisco Catalyst 9300 switches.Input voltage: 115-240VAC on 12-6A.Energy efficiency rating: 80 PLUS Platinum.Features a power cord for connection to an AC power outlet.Dimensions: 1.58"H x 13.7"W x 3.25"D.Weight: 3.1 lbs.

The CyberPower PDU41001, an 8-outlet (front), 1U rackmount switched power distribution unit (PDU), provides 120V 15A output. It distributes power to eight NEMA 5-15R receptacles from a single NEMA 5-15P plug with unfiltered electrical pass-through. The switched outlet receptacles can be managed individually or collectively over the network, using the CyberPower Management Console, a web browser, and the RJ45 Ethernet port for network connection, or locally by using the LCD controls..Delivers AC power to servers, equipment, and connected devices via a power distribution unit.Nominal input voltage 100-120VAC.Provides 100-120V 15A output.Dimensions: 1.75"H x 17.05"W x 4.41"D.Single NEMA 5-15P plug with unfiltered electrical pass-through.Distributes power to eight NEMA 5-15R receptacles.Provides local and remote control for individual and multiple outlets.Allows for installation of the PDU in the following configurations: 0U (vertical, under counter, and wall mount), 1U (horizontal, vertical, under counter, and wall mount), and 2U (horizontal and wall mount).Included: four mounting brackets (two short and two long), 10 flat head M4x8 bracket mounting screws, cord retention tray, 10 cable ties, 6 M3x6 cord retention tray mounting screws, six M5x12 screws, six washers, RJ45/DB9 serial port connection cable, user manual, registration card, CD.3-year manufacturer limited warranty

The APC AP8830 metered power distribution unit has 24 NEMA 5-20R receptacles for reliable performance. This 2G power distribution unit is rated at 100 - 120 V and 20 A. It mounts vertically in racks or enclosures and occupies zero U of valuable rack space to facilitate more equipment in the rack..Metered rack power distribution unit enable advanced, user-customizable power control and active monitoring.Dimensions: 70.5"H x 2.18"W x 1.72"D.Comes in black color.Nominal output voltage: 100 V, 120 V.Output connections: (24) NEMA 5-20R (battery Backup).Input connections: NEMA L5-20P.Input frequency: 50/60 Hz.Acceptable input voltage: 100 - 120 VAC.Cord length: 9.84'.Number of power cords: 1.Load capacity: 1920 VA.Maximum input current: 20 A.Regulatory derated input current (North America): 16 A.Temperature: -5 to 45 deg C (operating), -25 to 65 deg C (storage), Relative humidity: 5 - 95 % (operating), 5 - 95 % (storage).Rack-mountable.Contains installation guide, rack mounting brackets, safety guide and serial configuration cable.Meets cUL Listed, FCC Part 15 Class A, ICES-003, UL 60950-1, UL Listed, RoHS certifications or standards.Weight: 12.3 lbs..Comes with 2 years limited warranty

The Tripp Lite® PowerVerter ultracompact power inverter features a compact, lightweight design for easy portability. This inverter comes with DC terminals for simple operation. Requires 12 V DC battery power to convert to 120 V AC power that allow you to run appliances. Features a low battery alarm with auto-shutoff to prevent deep battery discharge. Remote control jack provides optional remote monitoring and control when used with optional remote module. Inverter operation is effectively controlled operating mode switch. LED indicates the charging levels of the battery and load level for user convenience. The mounting flanges offers safe installation of inverter. This inverter has a grooved cooling surface that provides additional surface area for effective cooling..Power inverter is suitable for powering laptops, televisions, video game systems, stereos, toasters, refrigerators and small microwave ovens.Dimensions: 4 1/4"H x 6"W x 13"D.Comes in new gray color.Comes in compact style and requires 5-15R output receptacles with 1000 W of capacity at 60 Hz.Offers output voltage regulation of 115 VAC (+/- 10% VAC) and output frequency regulation of 60 Hz (+/- 5% Hz).Supports minimum gauges for full load operation of #4 wire (12' max), #2 wire (20' max) and #0 wire (31' max).Has four outlets.Provides automatic overload protection that shuts down inverter system in the event of overloads.Has 3-position rocker switch with remote settings for on/off power control that allows inverter to be remotely powered on or off.Features dual function alarm indicator to indicate overload conditions or low DC input voltage of 10.5 V or less.Made of aluminum and sheet metal for added durability and strength.Supports mounting slots form factor that allows permanent placement of inverter on any horizontal surface.Allows remote control capability and has permanent mounting brackets with hard wired battery connections.Offers full continuous load of 100 A at 12 VDC, no load of 1.5 A at 12 VDC with shutdown/load sense mode.Helps to power up desktop computer systems, portable electronics, game systems, TVs, DVD players and other power AC appliances in less than 1000 W.Operates at relative humidity of 0-95% and offers fan cooling method.Includes warranty information and instruction manual.Meets RoHS certifications and standards.Weight: 6 lbs..Comes with a limited warranty of 1 year.The Tripp Lite® PowerVerter ultracompact power inverter with 4 outlets offers uninterrupted power supply for your devices. Delivers power of 1000 W and peak power of 2000 W.

Tripp Lite PDU1220T Power Distribution Unit, 120 VAC Input/Output.Single phase NEMA L5-20P 4.57m 20A 120 VAC input.50/60 Hz frequency.Outlet connector: 13 x NEMA 5-15R, NEMA 5-20R.Cord length: 15'.Output voltage: 120 V, Overload protection: 20 A.Number of power cords: 1.PDU input voltage 100, 120, 127V, Voltage compatibility: 120 VAC, power rating: 20.Dimensions: 1.75"(H) x 17.5"(W) x 4.5"(D).Outlets center to center measurement: 30.2mm.Style: Rackmount, vertical rackmount, wallmount/under counter, Management: Browser, CLI, SNMP, serial or IP.1U horizontal rackmount format installs in one rack space, back panel grounding lug, high quality design includes rugged all-metal housing and secure rackmount installation with included mounting accessories.Mounting flanges support installation in 2 and 4 post racks, with additional support for wall mount and under counter installation formats.Supplies equipment with continuous power from any protected UPS, generator or mains input power source.Compatibility: Distribution of UPS, generator or commercially derived AC power to protected equipment.Package contents: PDU1220T rackmount power strip, instruction manual and warranty information.Certifications and standards: Tested to UL60950-1 (USA), CSA-C22.2 (Canada), cUL, ROHS.Weight: 5.2 lbs..Warranty: 5 years limited.Tripp Lite Power Distribution Unit - Consolidate Your Power Source

APC AP9567 Basic Rack PDU I=includes installation guide, rack mounting brackets, toolless mounting kit..Nominal Output Voltage 120V.Maximum Total Current Draw per Phase 15A.Nominal Input Voltage 100V, 120V.2 years repair or replace warranty.2 years repair or replace warranty.Includes: installation guide, Rack Mounting brackets, Toolless Mounting Kit.Units do not require additional tools to mount into APC netshelter enclosure, which allows the users to quickly and easily mount units in the rear of the enclosure.Easily mounts vertically in racks or enclosures and occupies zero U of valuable rack space, which allows more equipment in the rack. Units that mount vertically are optimized to fit in a NetShelter enclosures.0 - 95% operating relative humidity.0 - 95% storage relative humidity.Operating/storage elevation: 0 - 10000'/0 - 50000'.Weight: 4.8 lbs..Dimensions: 24"(H) x 1.76"(W) x 1.76"(D).2 years limited Mrf. warranty.APC® AP9567 Basic Power Distribution Unit (PDUs) allows user to distribute power outlets to rack-mount equipment.

APC AP9563 Basic Rack PDU includes installation guide and rack mounting brackets..Nominal Output Voltage 120V.Maximum Total Current Draw per Phase 16A.Nominal Input Voltage 100V, 120V.Contains Lithium Battery.2 years repair or replace warranty.2 years repair or replace warranty.0 - 95% storage relative humidity.Operating/storage elevation: 0 - 10000'/0 - 50000'.Certifications: cUL recognized, CSA, UL 1363, UL recognized, RoHS complaint.Weight: 5.50 lbs..Dimensions: 1.75"(H) x 17.60"(W) x 2.25"(D).2 years limited Mfr. warranty.APC® AP9563 Basic Power Distribution Unit (PDUs) allows user to distribute power outlets to rack-mount equipment.

Tripp Lite™ Power distribution unit has a input/output voltage rating of 120 V and frequency rating of 50/60 Hz. Power distribution unit is rack mountable and supplies equipment with continuous power from any protected UPS..Single phase NEMA L5-30P 4.57m 30A 120 VAC input.50/60 Hz frequency.Outlet connector: 24 x NEMA 5-15R.Cord length: 15'.Output voltage: 120 V, Overload protection: 30 A.Number of power cords: 1.Maximum input current: 30 A, PDU input voltage 100, 120, 127 V, Voltage compatibility: 120 VAC, Power rating: 24.Dimensions: 1.75"(H) x 17.5"(W) x 4.5"(D).Outlets center to center measurement: Distance between Front outlets = 30.2mm, Distance between Rear outlets = 30.2mm, TVSS grounding: Back panel nut and bolt grounding lug.Style: Rackmount, vertical rackmount, wallmount/under-counter, Form factor supported: 1U rackmount, 0U vertical rackmount, wall-mount and undercounter installation supported.High quality design includes rugged all-metal housing and secure rackmount installation with included mounting accessories.Mounting flanges support installation in 2 and 4 post racks, with additional support for wall-mount and under-counter installation formats.Supplies equipment with continuous power from any protected UPS, generator or mains input power source.Package contents: PDU2430 rackmount power strip, warranty information, instruction manual.Certifications and standards: Tested to UL60950-1 (USA) and CAN/CSA C22.2 No. 60950-1-03 (Canada), RoHS compliant.Weight: 3.3 lbs..Warranty: 5 years limited.Tripp Lite Power Distribution Unit - 120V Input/Output Rackmount

The Eaton® EMA108-10 G3 managed Power distribution unit in black, provides a billing grade accuracy monitoring at the outlet level on a local LCD pixel display or over a network connection. The high accuracy meter will measure voltage, current, power and energy for load balancing, capacity planning, efficiency monitoring and energy usage reporting..Power distribution unit offers a range of basic and metered PDUs for any application.Dimensions: 66.5"H x 2.05"W x 2.56"D.Comes in black color.Input: (1) NEMA L5-30P, output: (24) NEMA 5-20R.Input current: 24 A, frequency: 50 - 60 Hz.Input voltage: 120 V, output voltage: 120 V, single phase.Form factor: Vertical.Rack height: 0U.Serial interface: RS232, Ethernet interface: 10/100 Ethernet.Cable length: 10'.Outlet control, voltage monitoring, current monitoring: Input, section, outlet, +/- 1%.Enables on/off/reboot capabilities for a single piece of equipment with outlet-level control.Circuit breakers: (2) 20 A.Manages entire environment remotely over the network from a single interface.Meets UL, cUL standards

Tripp Lite Switched PDU offers advanced network control and monitoring with the ability to turn on and off. PDU features 16 switched outlets that can be controlled in real-time to remotely reboot unresponsive network hardware..Input voltage: 120 VAC.Output voltage: 120 VAC.Supports power-on, power-off or reboot of each outlet on a real-time or programmable basis.PDU type: Switched.Frequency: 50/60 Hz.Input receptacles: NEMA 5-15P.Output receptacles: 16 x NEMA 5-15R.Form factor: Horizontal rackmount, vertical rackmount.Dimensions: 1 3/4"(H) x 17 1/2"(W) x 15 1/2"(D).Appearance: Black 1U rackmount steel chassis.Management protocols: HTTP, HTTPS, SMTP, SNMPv1, SNMPv2, Telnet, FTP, DHCP, BOOTP, NTP.Front panel LEDs: 16 LEDs display power on - off status for each outlet, digital current meter display shows total output power consumption in amps.Includes: Switched PDUMH15NET 16-outlets PDU, installable 1U mounting brackets, PowerAlert software CD, cord retention Bbrackets, user manual.Certifications: Tested to UL 60950-1 (USA, Canada), class A (Emissions), NOM (Mexico), RoHS compliant.Weight: 12.5 lbs..Warranty: 2 years limited.Tripp Lite Switched PDU has input/output AC voltage of 120 V and maximum input current of 15 A operating at a frequency of 60 Hz and weighs around 12.5 lbs.

Tripp Lite™ Power distribution unit is made of sheet metal for durability and has a input/output voltage rating of 120 V. Power distribution unit is rack mountable and supplies equipment with continuous power from any protected UPS..Single phase NEMA L5-30P 4.57m 30A 120 VAC input.50/60 Hz frequency.Outlet connector: 12 x NEMA 5-15/20R.Black.Cord length: 15'.Output voltage: 120 V, Overload protection: Two 20A breakers protect 6 outlets each.Material of construction: Sheet metal.Maximum input current: 30A, PDU input voltage 100, 120, 127V, Voltage compatibility: 120 VAC.Dimensions: 1.75"(H) x 17.5"(W) x 6.5"(D).Outlets center to center measurement: Distance between outlets = 30.20mm, Distance between Bank 1 and Bank 2 = 41.45mm, TVSS grounding: Rear grounding lug.Style: Rackmount, vertical rackmount, wallmount/under counter, Form factors supported: 1U rackmount, 0U vertical rackmount, wall-mount, and under-counter installation.Outlets are arranged in two loading banks, each with separate 20A breaker protection, highly reliable design includes rugged all-metal housing and secure rackmount installation with included mounting accessories.Mounting flanges support installation in 2 and 4 post racks, with additional support for wall-mount and under-counter installation formats.Ideal means of powering networking equipment in datacenters, computer rooms and network closets, supplies equipment with continuous power from any protected UPS, generator or mains input power source.Package contents: PDUMH30 metered rackmount PDU, owner's manual with warranty information.Certifications and standards: Tested to UL60950-1 (USA) and CAN/CSA C22.2 No. 60950-1-03 (Canada), RoHS compliant.Weight: 7 lbs..Warranty: 2 years limited.Tripp Lite Power Distribution Unit - Ideal for Powering Servers

The Cisco Catalyst 9200 switch chassis has two power supply slots that operates with either one active power supply module and a redundant power supply module. You can use two AC modules or one AC module and a blank cover. The active and redundant modules must be of the same type. All power supply modules have internal fans. All switches ship with a blank cover in the second power supply slot. The main module is field replaceable and the redundant module is hot-swappable. The redundant power supply can also be used for extra PoE power..1000W AC power supply module for switch.Compatible with Catalyst 9200 series switches.Supports input voltages between 100 and 240VAC.Features a power cord (18-AWG) for connection to an AC power outlet

TRIPP LITE 5-15R 8 Outlet 15 A 100 - 127 V Switched Power Distribution Unit provides a redundant power option for single-corded network devices. Dual input cords support separate connection to PRIMARY and SECONDARY power sources. The ATS will normally maintain continuous output to all outlets as derived from the primary input cable. If the primary power source becomes unstable or fails altogether, the ATS will switch over to the secondary power source until the primary input is restored and stable. Switched PDU features include individually controllable output receptacles and built-in network interface. Super-fast switchover between primary and secondary power sources occurs within milliseconds. ATS functionality is supported by any two compatible AC power sources, regardless of phase angle, to support a variety of advanced redundant power networking applications. It enables fault tolerant hot-swappable UPS protection when used with a single UPS and fully redundant UPS protection when each cord is connected to a separate UPS system. In a two-UPS environment, the primary input cable must be supported by a full time sine wave UPS with zero transfer time. Tripp Lite SmartOnline series is highly recommended for use as the primary UPS in a two-UPS application. The ATS configurations utilizing separate mains circuits, backup generators and even separate utility power grid feeds are fully supported. On-board ATS processor constantly evaluates power quality on both input sources to prevent transfer to the secondary source when unavailable or of lower quality than the primary source. The front input LED's display primary or secondary power availability..Single phase NEMA 5-15P 12 ft 15 A 100 - 127 V input.120 V 60 Hz output.8 NEMA 5-15R outlet connector.1U horizontal rack mount form factor.Package includes PDU with attached 5-15P input power cord, detachable C13 to NEMA 5-15P 12 ft/3.6m secondary input cord, installable 1U mounting brackets, user manuals with warranty information.Visual meter reports output power consumption in amps.ATS features provide redundant power for critical network equipment with a single input power cord.Switched PDU features enable programmable or real-time power control of individual outlets via built-in network interface.Advanced ATS configurations using separate mains circuits, backup generators and out of phase utility feeds are fully supported.2-7 millisecond transfer time between primary and secondary inputs.Front panel LEDs confirm power availability on primary/secondary inputs and each output receptacle.ATS configurations enable hot-swappable UPS protection when used with a single UPS and redundant UPS protection when each input is connected to a separate UPS system.On-board processor evaluates power quality on both inputs to prevent transfer to the secondary source when unavailable or of lower quality than the primary source.Outlets are factory programmed for sequential turn-on at 250 millisecond intervals as the PDU is first energized.Typical applications: ATS PDU systems provide a redundant power option with individual outlet control for single-corded network devices.DHCP/Manual configuration support, supports HTTP, HTTPS, PowerAlert network management system, SMTP, SNMPv1, SNMPv2, Telnet, SSH, FTP, DHCP, BOOTP, NTP protocols.Certifications: Tested to UL 60950-1 (USA, Canada), Class A (Emissions), NOM (Mexico), RoHS compliant.11 lbs.1 3/4"(H) x 17 1/2"(W) x 14 1/2"(D).2 years limited warranty.TRIPP LITE 5-15R 8 Outlet 15 A 100 - 127 V Switched Power Distribution Unit's ATS features provide redundant power for critical network equipment with a single input power cord.

Featuring a power capacity of 3 kVA for long-lasting reliability, the Liebert MicroPOD power distribution unit offers a continual power supply to effectively run your UPS system. With an output voltage of 120 VAC, this power-distribution unit operates efficiently in temperatures ranging from 32 to 104 degrees Fahrenheit. The Liebert MicroPOD power-distribution unit is rack mountable to ensure an easy installation, and the bypass switch provides uninterrupted power to any micro-UPS system..Size: 3 1/2"(H) x 17"(W) x 3 1/2"(D).Black.For use with: Any brand of UPS system.Connections: 8 x NEMA 5-20R output, NEMA 5-20P input.Power capacity: 3 kVA.Input voltage: 120 VAC single-phase.Output voltage: 120 VAC, 50 Hz, 60 Hz.Current: 16 A output current, circuit breaker: Two 20A fuse.Operating conditions: 32 deg F - 104 deg F temp, 0 to 95% Non-condensing relative humidity, storage: -4 deg F - 140 deg F temp.Form factor: Cabinet, rack-mountable.Status indicators: "Utility/Mains" indicator illuminates amber to indicate that utility/mains power is available for the load and UPS, "UPS" indicator illuminates green to indicate the presence of UPS output power for the load.Normal - The UPS is continuously supplied available utility power by the POD, UPS output power is returned to the POD and distributed to the critical AC load through the POD output receptacles.Maintenance bypass - The bypass switch allows a transfer of the critical AC load from the UPS inverter to the utility source, to allow for service to or replacement of the UPS, without interrupting the load.Bypass switch is capable of switching up to 20 or 30 amps, based on the model of the POD. The switch is a break before make type, with a maximum transfer time of 6ms.Connection to UPS Input: 5-15R, connection to UPS Output & cord length: 5-15P on attached 6 foot cord.Complaint and standards: UL1778, cUL, ISTA Procedure 1A listed, ISO 9001.Package contents: Micro Pod 3kVA PDU, power cord - 10 ft, user manual, brackets for rack mounting.Warranty: 2 years limited.Liebert MicroPOD MP2-120C Power-Distribution Unit - Continual Power Supply

Tripp Lite Single phase basic power distribution unit has NEMA 5-15P enclosure to offer added protection and can be 1U/0U vertical rack mounted. Unit has NEMA 5-15R outlet connector and offers 15 A overload protection..Single phase NEMA 5-15P 15' 15 A 120 V nominal input.120 V 50/60 Hz output.Outlet connector: 13 NEMA 5-15R.Overload protection: 15 A.1U/0U vertical rack mount.Package includes: PDU1215 rackmount power strip, warranty information, instruction manual.Mounting flanges support installation in 2 and 4 post racks, with additional support for wall-mount and under-counter installation formats.Back panel nut and bolt grounding lug.Reversible housing; 4 1/2" depth.Typical applications: Internetworking, PC systems, telecommunications, audio/video, security, sound reinforcement and more. Ideal for distribution of UPS, generator or commercially derived AC power to protected equipment.Dimensions: 1 3/4"(H) x 17 1/2"(W) x 4 1/2"(D).limited lifetime mfr. warranty.Tripp Lite Sigle Phase Basic Power Distribution Unit offers reliable rackmount power distribution. It supplies equipment with continuous power from any protected UPS, generator or mains input power source.

Eaton® 5S Series 420 W Tower UPS displays critical UPS information on battery time and outage tracking through a user-friendly LCD interface. UPS has 8 x NEMA 5-15R receptacles and requires input voltage of 110 VAC while outputs voltage of 115 VAC..Input voltage: 93 - 138 VAC.Output voltage: 115 VAC.Receptacles: 8 x NEMA 5-15R.Load capacity: 700 VA/420 W.Frequency: 50/60 Hz input.Interface/ports: USB.Batteries: Sealed lead acid.Backup/run time: 2 minute full load, 11 minute half load.Form factor: Tower.Dimensions: 9.8"(H) x 3.4"(W) x 10.2"(D).Software included: Eaton UPS companion software.Includes 5S UPS, USB cable, user manual.Certification and Standards: RoHS, UL 1778, UL497A, CE, cTUVus, NOM.Weight: 13.1 lbs..Warranty: 3 years limited.Eaton® 5S Series 420 W Tower UPS delivers backup power for desktop PCs and workstations and enables you to save up to 30% in energy consumption.

1500VA/900W Intelligent LCD Battery Backup Uninterruptible Power Supply (UPS) System uses simulated sine wave output to safeguard workstations, networking devices, and home entertainment equipment.Supplies power long enough for equipment to properly shut down when utility power fails. Helps prevent loss of data and minimizes the component stress caused by a hard shutdown..Diverts excess voltage away from sensitive electronic equipment during an AC power surge or power spike to prevent damage..AVR increases the AC power and maintains a safe voltage level without switching to battery mode and conserving battery life..Displays immediate, detailed information on the UPS battery and power conditions, alerting users to potential problems before they can affect critical equipment and cause downtime.Prevents power surges that travel through coaxial and ethernet lines from causing damage to electronics..Exists when a line interactive UPS has an autotransformer that regulates low voltages (e.g., brownouts) and over voltages (e.g., spikes) without having to switch to battery..Provides a manufactured waveform output to supply cost-effective battery backup power for equipment that does not require sine wave output..This model is an ENERGY STAR® certified Uninterruptible Power Supply (UPS) system. ENERGY STAR is the trusted, government-backed symbol for energy-efficient products and practices that help save money and protect the environment..A patented design that allows utility power to bypass the UPS transformer, when AC power is stable, which reduces energy consumption, noise, and heat buildup..Minimizes noise during operation for a quieter work environment..Provides a user-friendly dashboard interface for controlling and monitoring the UPS. Free software download available..CyberPower will repair or replace a defective UPS system (including batteries) within three years of the purchase date. See warranty for details..CyberPower will repair or replace properly connected equipment if it is damaged by a power surge..Typical Applications:Desktop Computers,Workstations,Home Theater Equipment,Personal Electronics,Home Networking,VoIP Phone Systems,Automatic Voltage Regulation.Replacement Battery CartridgeRB1290X2E (not included).Physical Dimensions – (WxHxD) (in)3.94 x 10.2 x 13.78 (in).Physical Weight (lb)23.8.CyberPower Intelligent LCD UPS CP1500AVRLCD3 1500VA Mini-tower UPS - Mini-tower - AVR - 8 Hour Recharge - 3 Minute Stand-by - 120 V AC Input - 120 V AC Output - Serial Port - 12 x NEMA 5-15R, 1 x USB Type A, 1 x USB Type C

Tripp Lite SmartOnline™ SU1500RTXLCD2U 1.5kVA UPS.Input voltage: 110 VAC.Output voltage: 127 VAC, 110 VAC, 120 VAC, 115 VAC.Power capacity: 1.35 kW/1.5 kVA.Dimensions: 3 1/2"(H) x 17 1/2"(W) x 18 1/2"(D).Plug/connector type: NEMA 5-15P.Receptacles: 6 x NEMA 5-15R.Network management: SNMP manageable.7 front panel LEDs indicate line power availability, AC to DC conversion, battery mode operation, inverter mode, eco mode operation, bypass mode operation and AC output status.Form factor: Tower/rack mountable.Supports watchdog application, OS and hard-reboot restart options for remote applications.Switches: 2 switches control Off/On power status and alarm-cancel operation, 2 additional scroll-down and scroll-up/select options enable LCD status viewing and configuration options.Software included: Power alert software.Frequency compatibility: 50/60 Hz.Cold-start operation supported.Hot swappable batteries.Audible alarm indicates UPS startup, power-failure, low-battery, overload, UPS fault and remote shutdown conditions.Certifications & Standards: CSA, UL1778, FCC part 15 category A (EMI).Weight: 45.2 lbs..Warranty: 2 years.Tripp Lite SmartOnline 1500 VA LCD Rackmount UPS continuously converts raw AC input to DC and re-converts output into AC and has back up time of 0.07- 0.23 hrs. for various voltages.

Power multiple devices efficiently with this 1U 12‑Outlet Rackmount PDU, designed for server rooms, AV environments, and IT deployments requiring organized and reliable power distribution. It features twelve NEMA 5‑15 right‑angle outlets that provide extra spacing to accommodate bulky power adapters without blocking adjacent ports. With six outlets on the front and six on the rear, the unit supports flexible equipment placement while maintaining clean cabling. A built‑in 15A circuit breaker protects connected hardware from overloads, while the illuminated, covered power switch prevents accidental shutoff. The 8 ft (2.4 m) power cord provides extended reach, and the included 4‑way mounting brackets allow horizontal or vertical installation in standard 19" racks at least 4" deep. Constructed from rugged SPCC steel, this TAA‑compliant PDU delivers dependable performance for always‑on IT environments..Runs as a single‑phase rack power distribution unit..Accepts 120V AC input for standard IT deployments..Supports up to 15A of output current..Fits a 1U rack footprint for compact mounting..Uses a NEMA 5‑15 input plug for power delivery..Provides 12 wide‑spaced NEMA 5‑15 outlets..Offers 12‑outlet capacity for dense rack loads..Includes a 7.9 ft cord for flexible positioning..Comes with brackets, screws, washers, and guide..Meets UL 1363 and EIA/ECA‑310‑E standards..2‑year manufacturer warranty.

The APC® AP8632 metered-by-outlet with switching rack power distribution unit features 24 NEMA 5-20R output receptacles for connectivity. It provides remote individual outlet control to remotely manage outlets. This PDU has local current monitoring display to monitor current drawn by the circuit. It offers real power monitoring and a temperature/humidity sensor port. Through secure Web, SNMP or Telnet interfaces, one can access, configure and control switched rack PDUs..Power distribution unit provide active metering of individual outlets and remote on/off switching control of individual outlets.Dimensions: 72"H x 2.2"W x 2"D, 10' cable.Comes in black color.Receptacles: NEMA L5-30P (input), 24 NEMA 5-20R (output).Power: 2.88 kVA, 30 A, 120 VAC.Form factor: Rack-mountable, vertical.Management: Web, SNMP and Telnet.Frequency: 50/60 Hz.Environmental conditions: 23 - 113 deg F, 5 - 95% (humidity).Firmware upgradable and offers overload protection.Includes installation guide, rack mounting brackets, safety guide and serial configuration cable.Meets cUL, FCC Part 15 Class A, ICES-003, PSE, UL 60950-1, UL listed, RoHS, REACH certifications and standards.Weight: 17.71 lbs..Comes with 2 years warranty.Includes installation guide, rack mounting brackets, safety guide, serial configuration cable.Certifications and standards: cUL Listed, FCC Part 15 Class A, ICES-003, PSE, UL 60950-1, UL Listed, RoHS, REACH.Weight: 8.05 Kg.Warranty: 2 years repair or replace.APC® Rack power distribution unit offers advanced power control with individual power metering and is rack-mountable.

The Tripp Lite PDUMNH20 single-phase monitored PDU with eight outlets, reports voltage, frequency and load level through Ethernet interface. It features lighted display that continuously reports output power consumption in amps. This PDU supports HTTP, HTTPS, PowerAlert network management system, SMTP, SNMPv1, SNMPv2, SNMPv3, Telnet, SSH, FTP, DHCP, BOOTP and NTP protocols. It offers real-time clock backup to maintain the time of day and date. The 10/100 Mbps auto-sensing feature of this PDU, allows optimal communication with 10/100 Base-T networks..Single-phase monitored PDU SmartOnLine SU2200RTXL2Ua, SU2200RTXLCD2U, SU2200XLCD, SmartPro SM2200RMDVTAA, SMART2200CRMXL UPS.Dimensions: 1.7"H x 17.3"W x 6.2"D.Metal construction for durable use.Output receptacles: Eight NEMA 5-15/20R, Input receptacles: NEMA L5-20P.Input voltage: 120 VAC, Output voltage: 120 VAC, Input current: 20 A.Frequency required: 50/60 Hz, Power rating: 1.9 kW.Cable length: 12'.Management protocols: HTTP, HTTPS, PowerAlert Network Management System, SMTP, SNMPv1, SNMPv2, Telnet, FTP, DHCP, BOOTP, NTP.Form factor: Horizontal rackmount.Front panel LCD display: Digital meter reports PDU output current in amps.Storage temperature: 5 to 122 deg F, Relative humidity: 5 - 95 percent non-condensing, Operating elevation: 0 - 10000'.Tiered access privileges allow an administrator and a guest to login via web browser.Built-in SNMP/Ethernet interface reports voltage, frequency and PDU loading via network or secure web browser interface using user specified alarm.Supports DHCP/manual configuration and 10/100 Mbps auto-sensing for optimal communication with 10/100 Base-T networks.Contains plug retention plates, rack mount brackets, owner's manual, L5-20R to 5-20P adapter.Meets Tested to UL 60950 (USA), CSA (Canada), Class A (Emissions), NOM (Mexico), RoHS compliant certifications and standards.Weight: 7 lbs..Comes with 2 years limited warranty

TRIPP LITE 5-15/20R 28 Outlet 20 A 100 - 127 V Metered Power Distribution Unit offers real-time local reporting of load level in amps via built-in digital display. It enables visual monitoring of PDU load levels to prevent overloads as additional equipment is added. Also offers reliable rackmount multi-outlet power distribution from any protected UPS, generator or mains input power source. High quality design includes rugged all-metal housing and secure rackmount installation with included mounting accessories..Single phase NEMA 5-20P / NEMA L5-20P 15 ft 20 A 100 - 127 V input.120 V 50/60 Hz output.28 NEMA 5-15/20R outlet connector.20 A overload protection.0U vertical rack mount.2 digit lighted meter reports combined total output current in amps.Package includes PDUMV20 metered vertical PDU, (1) L5-20P to 5-20P plug adapter, mounting hardware and spare mounting buttons, instruction manual with warranty information.Includes 20 A circuit breaker and lighted power switch inside a transparent protective cover.Digital ammeter display indicator.Toolless installation supported in button-mount compatible equipment racks.Bolt-down installation brackets support installation in other racks and additional surfaces.Typical applications: Ideal means of powering networking equipment in datacenters, computer rooms and network closets.Certifications: Tested to UL60950-1 (USA) and CAN/CSA C22.2 No. 60950-1-03 (Canada), RoHS compliant.6 lbs.1 3/4"(H) x 60"(W) x 1 1/4"(D).Lifetime limited warranty.TRIPP LITE 5-15/20R 28 Outlet 20 A 100 - 127 V Metered Power Distribution Unit offers real-time local reporting of load level in amps via built-in digital display.

The Furman ELITE‑20 PF I is a high‑performance 20‑amp AC power conditioner engineered for demanding home theaters, studios, and professional AV environments, delivering exceptionally clean and stable power for maximum system performance. It features Ultra‑Linear Filtering Technology to dramatically reduce AC noise and reveal greater audio detail and video clarity, along with Power Factor Technology that provides over 55 amps of peak current reserve to ensure amplifiers deliver full dynamics without strain. The unit employs Series Multi‑Stage Protection (SMP) for non‑sacrificial surge suppression and Extreme Voltage Shutdown (EVS) to shield equipment from dangerous overvoltage conditions, offering robust reliability for sensitive components. With ultrasonic bi‑filtering that isolates digital, video, and analog circuits, retractable LED rack lights, 12V trigger control, and 13 total outlets, the ELITE‑20 PF I stands as a premium conditioning solution built for consistent, uninterrupted performance in any high‑end AV system..Provides 13 AC outlets for versatile power distribution while operating solely as a power conditioner with no battery‑backup function..Delivers up to 2400 watts of reliable power for demanding AV systems..Reliably delivers 120V AC output suitable for North American AV systems..Comprehensively integrates SMP surge protection, EVS over‑voltage shutdown, zero‑ground contamination, ultrasonic bi‑filtering, and linear noise filtering to safeguard connected equipment..Limited 3-Year Manufacturer Warranty.⚠ WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Single phase NEMA 5-20P / NEMA L5-20P 12 ft 20 A 100 - 127 V input.120 V 60 Hz output.16 NEMA 5-15/20R outlet connector.1U horizontal rack mount form factor.Package includes PDU with attached L5-20P input power cord, detachable C19 to NEMA L5-20P 12 ft/3.6m secondary input cord, two NEMA L5-20R to NEMA 5-20P plug adapters, installable 1U mounting brackets, user manual with warranty information.Visual meter reports output power consumption in amps.ATS features provide redundant power for critical network equipment with a single input power cord.Switched PDU features enable programmable or real-time power control of individual outlets via built-in network interface.Advanced ATS configurations using separate mains circuits, backup generators and out of phase utility feeds are fully supported.2-7 millisecond transfer time between primary and secondary inputs.Front panel LEDs confirm power availability on primary/secondary inputs and each output receptacle.ATS configurations enable hot-swappable UPS protection when used with a single UPS and redundant UPS protection when each input is connected to a separate UPS system.On-board processor evaluates power quality on both inputs to prevent transfer to the secondary source when unavailable or of lower quality than the primary source.Outlets are factory programmed for sequential turn-on at 250 millisecond intervals as the PDU is first energized.Typical applications: ATS PDU systems provide a redundant power option with individual outlet control for single-corded network devices.DHCP/Manual configuration support, supports HTTP, HTTPS, PowerAlert network management system, SMTP, SNMPv1, SNMPv2, Telnet, SSH, FTP, DHCP, BOOTP, NTP protocols.Certifications: Tested to UL 60950 (USA, Canada), Class A (Emissions), NOM (Mexico), RoHS complaint.12.2 lbs.1 3/4"(H) x 17 1/2"(W) x 14 1/2"(D).2 years limited warranty.2 years limited warranty.TRIPP LITE 5-15/20R 16 Outlet 20 A 100 - 127 V Switched Power Distribution Unit's ATS features provide redundant power for critical network equipment with a single input power cord.

The Eaton® 5S 5S700 700 VA 115 VAC Line-Interactive UPS offers full load backup/run time of 2 mins and half load backup/run time of 12 mins. It measures 9.8" x 3.4" x 10.2". The sealed lead acid UPS has one NEMA 5-15P plug, eight NEMA 5-15R plugs and USB port for connectivity. It offers surge protection. This maintenance-free UPS withstands an operating temperature of 0 to 35 deg C. It has input voltage rating of 93-138 VAC. It comes with cable and user manual..Line-interactive UPS for professional desktop PC's, professional workstations and small routers.Load capacity: 700 VA, 420 W.Dimensions: 9.8"H x 3.4"W x 10.2"D.Backup/run time (full load): 2 min, Backup/run time (half load): 12 min.Output voltage: 115 VAC.Form factor: Tower.Battery chemistry: Sealed Lead Acid.Interface: USB, Receptacles: Eight NEMA 5-15R, Dataline protection: RJ-45, Input cord: 6'.Surge protection: Line & network line.Plug/connector type: One NEMA 5-15P, Cord length: 6'.Color: Black, Battery characteristics: Maintenance-free, Number of batteries: 1, Start on battery: Allows start of UPS without utility power.Input voltage range: 93-138 VAC, Nominal voltage: 120 VAC, Operating frequency: 50/60 Hz (autosensing), Frequency range: 46-70 Hz (50 Hz system).Audible noise: < 25 dB in normal mode.Operating temperature: 0 to 35 deg C, Storage Temperature: -15 to 40 deg C, Efficiency: >95%, Relative humidity: 0 - 90% non-condensing.Includes UPS, cable, user manual.Meets FCC Class B, UL 1778, FCC Part 15, UL497A, CE, cTUVus, NOM, RoHS certifications and standards.Weight: 14.3 lbs..Comes with 3 years warranty

TRIPP LITE 5-15/20R 12 Outlet 20 A 100 - 127 V Metered Power Distribution Unit offers real-time local reporting of load level in amps via built-in digital meter. It enables visual current monitoring of PDU output current to prevent circuit overloads as additional equipment is added. Also offers reliable rackmount multi-outlet power distribution from any protected UPS, generator or mains input power source. High quality design includes rugged all-metal housing and secure rackmount installation with included mounting accessories..Single phase NEMA 5-20P / NEMA L5-20P 15 ft 20 A 100 - 127 V input.120 V 50/60 Hz output.12 NEMA 5-15/20R outlet connector.20 A overload protection.1U horizontal rack mount.Package includes PDUMH20 metered rack mount PDU, L5-20R to 5-20P plug adapter, owner's manual with warranty information.Built-in 2 digit visual meter continuously reports PDU load level in amps.Back panel grounding lug.Rack mount, vertical rack mount, wall mount/under-counter style.Outlets center to center measurement: 30.20 mm.Form factors supported: 1U rack mount, 0U vertical rack mount, wall-mount, and under-counter installation.Mounting flanges support installation in 2 and 4 post racks, with additional support for wall-mount and under-counter installation formats.Typical applications: Multi-outlet power distribution unit with digital current monitoring is the ideal means of powering multiple loads in 19 inch rack mount, wall-mount, and under-counter applications such as internetworking, PC systems, telecommunicati.Certifications: Tested to UL60950-1 (USA) and CAN/CSA C22.2 No. 60950-1-03 (Canada), RoHS compliant.3.6 lbs.1 3/4"(H) x 17 1/2"(W) x 4 1/2"(D).Lifetime limited warranty.TRIPP LITE 5-15/20R 12 Outlet 20 A 100 - 127 V Metered Power Distribution Unit is made of rugged steel casing, and built in circuit breaker to ensure maximum durability.

The CyberPower SL700U uninterruptible power supply (UPS) system provides surge protection for lightning-induced surges and other power events that can damage electronic equipment. This unit delivers enough battery backup to connected devices during a utility power failure, so you can perform a graceful shutdown to protect against the loss of data and damage to valuable electronics including computers, gaming consoles, and home networking equipment. The SL700U has two Type A USB charging ports with 2.4A shared total output which gives you a faster charging time and can be used while on battery backup power. The slim profile and full-motion power cord allows for discrete installation and keyhole mounting slots allow for wall-mount applications as well. With a $100,000 connected equipment guarantee and a three-year warranty, you can trust CyberPower's commitment to the quality of the SL700U..UPS protects electronic equipment and prevents data loss during a power outage with 8 outlets for seamless connectivity.Power Capacity: 700VA; Output Power Capacity: 370 W.Surge energy rating: 890 Joules.Provides USB connectivity for maximum flexibility.5' cord allows you to set up your system at a comfortable distance.Charge time: 8 hours.Output voltage of 120 VAC to ensure adequate power supply.External form makes it convenient to install and use.Lead acid battery ensures efficient performance.Meets or exceeds FCC DOC Class B, cUL, UL 1778, and CEC standards.Dimensions: 5.4"H x 12.76"W x 2.76"D.3-year manufacturer limited warranty.⚠ WARNING: This product can expose you to chemicals including Styrene and Bisphenol-A which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to: www.P65Warnings.ca.gov

TRIPP LITE 5-15/20R 16 Outlet 20 A 100 - 127 V Metered Power Distribution Unit provides a redundant power option for single-corded network devices. The dual input cords support separate connection to PRIMARY and SECONDARY power sources. The ATS will normally maintain continuous output to all outlets as derived from the primary input cable. If the primary power source becomes unstable or fails altogether, the ATS will switch over to the secondary power source until the primary input is restored and stable. Super-fast switchover between primary and secondary power sources occurs within milliseconds. ATS functionality is supported by any two compatible AC power sources, regardless of phase angle, to support a variety of advanced redundant power networking applications. It enables fault tolerant hot-swappable UPS protection when used with a single UPS and fully redundant UPS protection when each cord is connected to a separate UPS system. In a two-UPS environment, the primary input cable must be supported by a full time sine wave UPS with zero transfer time. Tripp Lite SmartOnline series is highly recommended for use as the primary UPS in a two-UPS application. The ATS configurations utilizing separate mains circuits, backup generators and even separate utility power grid feeds are fully supported. On-board ATS processor constantly evaluates power quality on both input sources to prevent transfer to the secondary source when unavailable or of lower quality than the primary source. The front input LED's display primary or secondary power availability..Single phase NEMA 5-20P / NEMA L5-20P 12 ft 20 A 100 - 127 V input.120 V 60 Hz output.16 NEMA 5-15/20R outlet connector.1U horizontal rack mount form factor.Package includes PDU with attached L5-20P primary input cord, detachable C19 to NEMA L5-20P secondary input cord, set of two L5-20R to 5-20P plug adapters, 1U mounting brackets, user manual with warranty information.2 digit display reports output power consumption in amps.Super-fast switchover between primary and secondary power sources occurs in 2-7 milliseconds.Front panel LEDs confirm power availability on both input lines.Typical applications: Ideal means to provide single-corded network gear a redundant power option.ATS circuits normally maintain output sourced from the primary input cable, as primary input power fails or becomes unstable, the ATS will switch to maintain output sourced from the secondary input cable until power on the primary input is restored and st.ATS configurations enable fault-tolerant, hot-swappable UPS protection when used with a single UPS and fully redundant UPS protection when each cord is connected to a separate UPS system (in a two-UPS environment, the primary input cable must be supported.Advanced ATS configurations utilizing separate mains circuits, backup generators and even separate out of phase utility power grid feeds are fully supported.On-board ATS processor constantly evaluates power quality on both inputs to prevent transfer to the secondary source when unavailable or of lower quality than the primary source.Outlets are factory programmed for sequential turn-on at 250 millisecond intervals when the PDU is first energized to prevent inrush-related equipment interaction on startup.Indicator type: 16 front panel LEDs display power on - off status for each outlet, plus 2 LEDs for power status on each input line cord, digital current meter display shows total load consumption of connected equipment in amps.Certifications: Tested to UL 60950 (USA, Canada), Class A (Emissions), NOM (Mexico), RoHS complaint.12.2 lbs.1 3/4"(H) x 17 1/2"(W) x 14 1/2"(D).2 years limited warranty.TRIPP LITE 5-15/20R 16 Outlet 20 A 100 - 127 V Metered Power Distribution Unit provides redundant power option for critical networking equipment with a single input power cord.

The Tripp Lite PDUMH15-ISO 1.44 kW single-phase metered PDU with isobar surge suppression, provides real-time local reporting of load level in amps and noise suppression. It features a digital display that shows output current to prevent circuit overload when additional equipment is added and has a set of three front-panel LEDs to show wiring fault, protection present and line OK status. This PDU has a rugged all-metal housing and offers rackmount installation with included mounting accessories. It is compatible with 120 VAC sine wave input. The 1U PDU features NEMA 5-15P 15 A 120 V input plug with 15' cord and 14 NEMA 5-15R outlets..Power distribution unit offers reliable and cost effective power distribution.Dimensions: 1 3/4"(H) x 17 1/2"(W) x 4 1/2"(D).Sheet metal construction for long lasting durability.Receptacles: NEMA 5-15P input and 14 x NEMA 5-15R output.Voltage: 120 VAC at 50/60 Hz input/output, Input current: 15 A.Output capacity: 1.44 kW.Input cord length: 15'.Form factor: Horizontal (1U, 2U).Offers overload and surge protection.AC suppression joule rating: 3840 J, AC suppression surge current rating: 60000 A, Clamping voltage (RMS): 140 V.Front panel LEDs: Set of three diagnostic LEDs report LINE OK (green), suppressor or wiring FAULT (red) and PROTECTION PRESENT (green) status.Storage temperature: 5 - 122 deg F (-15 - 50 deg C), Relative humidity: 5 - 95 percent non-condensing, Operating elevation: 0 - 10000'.Built-in two digit visual meter continuously reports PDU load level in amps.Offers SOBAR Network-grade AC surge and noise suppression with EMI/RFI filtering.Contains owner's manual with warranty information.Meets UL1449 3rd Edition (USA) and CSA (Canada), RoHS standards or certifications.Weight: 4.6 lbs..Comes with 2 years limited warranty

The Vertiv Liebert GXT5 UPS, with a capacity of 1500VA/1350W, is a 2U compact and efficient UPS solution for ensuring the health and availability of IT infrastructure. With online, double conversion technology, the Vertiv Liebert GXT5 UPS protects critical equipment against outages and every type of power disturbance without drawing on battery power, extending battery life and minimizing replacements. This can support as wide range of power environment including 110/115/120/125V AC power and has scalable runtime options with matching external battery cabinets to offer extra time during an outage to support critical equipment and activity. The UPS design includes hot-swappable batteries and all hardware for installing it as a tower or in an equipment rack. This single-phase UPS is ENERGY STAR 2.0 certified and offers leading normal mode power efficiency and Eco-mode for ultimate efficiency levels. The unit includes a rack mounting hardware kit and base for tower installation in open environments. The Vertiv Liebert GXT5 offers premium power protection for critical infrastructure in centralized and edge applications..UPS protects electronic equipment and prevents data loss during a power outage.Equipped with six outlets for seamless connectivity.Provides USB connectivity for maximum flexibility.Output voltage of AC 100/110/115/120/125V to ensure adequate power supply.One management (usb), 1 rs-232.Lead acid battery ensures efficient performance.Meets or exceeds ANSI C62.41, UL 1778, FCC Part 15 A, WEEE, RoHS2, CSA C22.2 No. 107.1, REACH, AS/NZS CISPR22 Class A, and ISTA 1A standards.Dimensions: 3.35"H x 18.5"W x 16.93"D.3-year manufacturer limited warranty

The V SFX Gold provides the renowned quality synonymous with the V series, now in a compact SFX form factor. Enjoy compatibility with diverse cases, ATX 3.0 support, a robust 90° up to 600W 12VHPWR PCIe 5.0, 80 Plus Gold efficiency, premium Japanese capacitors, fully modular cabling, and a 10-year warranty. Its adaptable compatibility, small footprint, and exceptional performance make the V SFX Gold a powerhouse despite its compact size..850W Power Supply for Desktop Computers.90° Durable Cables: Featuring a 90° 12VHPWR PCIe 5.0 connector, for improved electrical durability and safety..ATX 3.0 Cables: The ATX 3.0 delivers up to 600W power to your GPU..Enhanced Dissipation: The integrated design of the transformer, rectifier, full-bridge LLC, and EMI-inhibited amorphous metal ensures top performance and cooling..Customized Cable Length: Customized short cables with the latest ATX 3.0 connector reduce clutter; extended cables may be needed for larger cases to reach certain components.80+ Gold Efficiency: With Gold-level performance at 90% efficiency, it ensures effective power transfer from the wall to your components..Energy Efficiency Certification: 80 Plus Gold.Number of Fans 1.Power Factor Correction (PFC) Active.MTBF 100000 Hour.Limited Warranty: 10 Year.⚠ WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

APC® Basic power distribution unit featuring NEMA 5-20R outlet connector can be 1U horizontal rack mounted and includes rack mounting brackets. Unit offers NEMA L5-20P input connections and has input current rating of 20 A..NEMA L5-20P 12' 20 A 100 - 120 V input.120 V 50/60 Hz output.Outlet connector: 10 NEMA 5-20R.1U horizontal rack mount.Includes: Installation guide, rack mounting brackets.0 - 95% operating relative humidity.0 - 95% storage relative humidity.Operating/storage elevation: 0 - 10000'/0 - 50000'.Certifications: cUL recognized, CSA, UL 1363, UL recognized, RoHS complaint.Weight: 5.50 lbs..Dimensions: 1.75"(H) x 17.60"(W) x 2.25"(D).2 years limited Mrf. warranty.APC® AP9564 Basic Power Distribution Unit (PDUs) allows user to distribute power outlets to rack-mount equipment.

The Vertiv Liebert GXT5 UPS, with a capacity of 1000VA/1000W, is a 2U compact and efficient UPS solution for ensuring the health and availability of IT infrastructure. With online, double conversion technology, the Vertiv Liebert GXT5 UPS protects critical equipment against outages and every type of power disturbance without drawing on battery power, extending battery life and minimizing replacements. This can support as wide range of power environment including 110/115/120/125V AC power and has scalable runtime options with matching external battery cabinets to offer extra time during an outage to support critical equipment and activity. The UPS design includes hot-swappable batteries and all hardware for installing it as a tower or in an equipment rack. This single-phase UPS is ENERGY STAR 2.0 certified and offers leading normal mode power efficiency and Eco-mode for ultimate efficiency levels. The unit includes a rack mounting hardware kit and base for tower installation in open environments. The Vertiv Liebert GXT5 offers premium power protection for critical infrastructure in centralized and edge applications..UPS protects electronic equipment and prevents data loss during a power outage.Equipped with six outlets for seamless connectivity.Provides USB connectivity for maximum flexibility.Output voltage of AC 100/110/115/120/125V to ensure adequate power supply.One management (usb), 1 rs-232.Lead acid battery ensures efficient performance.Meets or exceeds RoHS2, FCC Part 15 A, WEEE, ANSI C62.41, CSA C22.2 No. 107.1, REACH, ISTA 1A, AS/NZS CISPR22 Class A, and UL 1778 standards.Dimensions: 3.35"H x 15.75"W x 16.93"D.3-year manufacturer limited warranty

Prevent business interruptions and safeguard mission-critical enterprise network equipment. The CyberPower OL1000RTXL2UN is a rack/tower UPS with double conversion topology. It provides sine wave output to critical applications and equipment that require seamless power correction. The Extended Battery Module (EBM) expands runtime, and Fast Charge Technology restores full backup power faster. This model comes with an extendable LCD control panel, Smart Battery Management charging technology, and energy-saving GreenPower UPS ECO Mode. The OL1000RTXL2UN offers generator compatibility and delivers clean AC power with zero transfer time. A factory installed RM card allows remote management and configuration of the UPS via a standard web browser, command line interface (CLI), or network management system (NMS). Its sine wave output keeps sensitive equipment working by preventing unnecessary shutdowns that can occur with simulated sine wave output. With a $400,000 lifetime connected equipment guarantee and a three-year warranty, you can trust CyberPower's commitment to high quality..On-line UPS protects electronic equipment with 8 outlets for seamless connectivity.Power Capacity: 1000VA; Output Power Capacity: 900 W.Surge energy rating: 1780 Joules.Provides USB connectivity for maximum flexibility.9.84' cord allows you to set up your system at a comfortable distance.Charge time: 4 hours.Output voltage of AC 100, 110, 115, 120, 125 V to ensure adequate power supply.Rack-mountable / external form makes it convenient to install and use.Lead acid battery ensures efficient performance.Meets or exceeds FCC Part 15 B, RoHS, CSA C22.2 No.107.3-05, UL 1778 5th edition, and IEC 61000-4-5 Level three standards.Dimensions: 3.5"H x 17"W x 16.9"D.3-year manufacturer limited warranty

High-performance computer and electronics UPS for premium power protection. When you lose power and are running on a gaming UPS, you don't have indefinite power, just enough to lengthen that crucial window to victory..UPS protects electronic equipment and prevents data loss during a power outage.Surge energy rating: 1080 joules.Equipped with 10 outlets for seamless connectivity, six of them with battery backup to keep you connected.Three USB ports allow you to easily charge devices.Recharge time: 1.5 hours.Output voltage of 115VAC to ensure adequate power supply.Features 6 x NEMA 5-15P (battery + surge), 4 x NEMA 5-15P (surge), 2 x USB Type-A, 1 x USB Type-C, LAN ports.External form factor makes it convenient to install and use.Lead acid battery ensures efficient performance.Meets or exceeds FCC Part 15B Class B, cTUVus, UL1778, and NOM standards.Dimensions: 11.4"H x 4.2"W x 16"D.Gaming rigs powered by sine wave will run cooler and more efficiently on backup power to avoid overheating damage to your equipment.3-year manufacturer limited warranty.Safety Data Sheet.⚠ WARNING: The battery in this product can expose you to chemicals including lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warning.ca.gov.Safety Data Sheet

Weighing only 16.9 lbs. and delivering 660W AC output and 602Wh capacity, the B660 SST provides truly portable power: ensuring your devices are powered wherever your adventure takes you. It features optional Wi-Fi or Bluetooth-enabled APP control and a bright LED light. The control panel has 9 total ports, including AC, DC, USB-A, and C ports. Perfect for emergency power needs for home devices and appliances. Portable, lightweight, and powerful enough to use during outdoor camping, off-grid, RV, and recreational activities. Quiet with zero gas emissions and harmful fumes, the B660 SST can be recharged using DC via AC adaptor (charges from 0-100% within 5 hours), optional fast solar charging (8 hours), car charging (5 hours), and USB-C PD (6 hours)..ADVANCED SOLID-STATE TECHNOLOGY—Solid-state technology (SST) is the evolution in lithium batteries, which provide safer, more compact, and lighter power output than their conventional lithium-ion or LiFePO4 counterparts. The new solid-state battery provides safer and more compact power for off-grid and recreation use..SAFETY FIRST - Yoshino solid-state battery cells provide a peace of mind that the competition leaves out; Yoshino has full ETL certification on all its portable power stations and has been tested by Energy Assurance Labs (accredited third-party lab in the United States) undergoing nail penetration tests along with thermal runaway tests (no flammability issues like traditional lithium batteries), over voltage, over current, over charging, over discharging and short circuit protection..LONGER, BACKUP POWER - Lasting longer than traditional power bank devices due to the larger battery capacity – power more devices like computers, desktops, modems/routers, retail POS, and business VoIP. Use it as an emergency power source for the home as well..CLEAN & EFFICIENT POWER DELIVERY - Low THD (total harmonic distortion) ensures stable, high-quality power output, protecting sensitive devices, reducing energy losses, minimizing heat generation, and extending the lifespan of connected equipment..ENHANCED DEVICE COMPATIBILITY & EFFICIENCY - Pure Sine Wave AC output provides clean and stable power, making it ideal for sensitive electronics like laptops, medical equipment, and appliances, ensuring optimal performance, reduced risk of damage, and quieter operation compared to modified sine wave outputs. It is ideal for business, government, healthcare, education, retail industries, and even recreational use such as camping..PREMIUM POWER AND CAPACITY – 660 watts continuous (900 peak watts) of pure sine wave power and a capacity of 602Wh provides power for devices and most all home appliances. This SST battery is rated to 4,000 cycles to 80% (11+ years of everyday use.) Control from anywhere with an app-based remote smart access via Wi-Fi or Bluetooth..4 WAYS TO RECHARGE – The B660 SST can be recharged using DC via AC adaptor (charges from 0-100% within 5 hours), optional solar charging (8 hours), car charging (5 hours), and USB-C PD (6 hours)..SUPPORTS 9 CONNECTIONS – Ports include AC (pure sine wave, 120V) x3, DC (12V) x2, USB-A (5V) x2, USB-Type C (20W) x1, Type C PD (100W output, 60W input) x1.WHAT’S INCLUDED – (1) B660 SST Power Station, (1) 120W AC to DC Recharge Adapter, (1) Cigarette Car Charging Cable, (1) Cigarette Car Female Output Cable, (1) Solar Charging Cable MC4 to XT60, (1) User Manual.This portable power station is an essential battery-powered backup system that will allow you to become more self-sufficient whether using it for outdoor, home backup, recreational, or business use.

The Vertiv Liebert GXT5 UPS, with a capacity of 2000VA/1800W, is a 2U compact and efficient UPS solution for ensuring the health and availability of IT infrastructure. With online, double conversion technology, the Vertiv Liebert GXT5 UPS protects critical equipment against outages and every type of power disturbance without drawing on battery power, extending battery life and minimizing replacements..6-Outlet on-line double conversion UPS solution which offers premium power outage protection and continuous power conditioning in a compact and flexible rack/tower form factor.Reliable, easy-to-manage power protection and battery backup with 2000VA (1800W) capacity..4 hours charge time to 90% capacity after a complete discharge with full load connected.120VAC (user configurable: 110V, 115V, 120V, 125V) output voltage, 50/60Hz, single-phase, 2 wire-plus-ground.Made in 2U rack-mountable form factor.Utilizes valve-regulated, non-spillable, lead acid cells battery.User-friendly interface that includes color graphic display with gravity sensing feature.Remote management capabilities support real-time environmental monitoring and alarm notifications.Supports SNMP, web, and environmental sensors with included RDU101 communications card.Individually programmable output power receptacles.Rack / tower convertible systems.Hot-swappable internal battery and scalable power with auto-detection of external battery cabinets.2019 ENERGY STAR 2.0 certification and high operating efficiency in standard and eco-mode.Meets or exceeds ANSI C62.41 Category B/ ISTA Procedure 1A / UL 1778 4th Edition and CSA 22.2 No 107.3/ FCC Part 15 (Class A) - CISPR22 Class A (RFI)/ WEEE and ROHS2 REACH standards.3-year manufacturer limited warranty