Equipment Status Labels
62 results
Accuform SignsĀ® "EMERGENCY.." Cardstock equipment status tag has 4 columns with the headers that read date, by, date and by on both sides. 5 3/4" x 3 1/4" Tag features flexible 10 mil plastic surface and is water resistant, sold as 25 per pack..Size: 5 3/4"(L) x 3 1/4"(W).10-mil polyolefin-based (PF-cardstock).Legend: "EMERGENCY SHOWER and EYEWASH TEST RECORD".Package: 25/pack.Sign language: English.Eyewash and shower signs are visual indicators to guide people to, and mark the location of emergency showers or eyewash.Top has 3/8" plain hole.Pulp-free no wood pulp or paper content unlike regular cardstock.Pliable, yet will not rip or breakdown in moisture.Do not tear readily when tugged on.Ideal for indoor use and short term outdoor exposure.Scuff-resistant matte surface is easy to write on.Warranty: 30 days limited.Safety Tag.Thin and flexible 10-mil poly-based material contains no wood-based, paper content.Tear-resistant, waterproof matte surface is easy to write on with pen or marker, and will not crack, distort, or shrink.Complies with OSHA 29 CFR 1910.145 and ANSI Z535 requirements.Accuform SignsĀ® "EMERGENCY.." 5 3/4" x 3 1/4" CardstockĀ equipment status tag comes with 3/8" dia hole for easy fastening and provides a blank grid for writing the data, sold as 25 per pack.
Accuform SignsĀ® "EMERGENCY.." RP-Plastic equipment status tag has 4 columns with the headers that read date, by, date and by on both sides. Tag features flexible 10 mil plastic surface and is water/chemical resistant, sold as 25 per pack..Size: 5 3/4"(L) x 3 1/4"(W).15-mil rigid plastic material.Legend: "EMERGENCY SHOWER and EYEWASH TEST RECORD".Package: 25/pack.Sign language: English.Eyewash and shower signs are visual indicators to guide people to, and mark the location of emergency showers or eyewash.High-strength plastic tags are water resistant to withstand weather conditions.Tear-resistant, weather-resistant and chemical resistant for dirty and greasy environments.Relatively bendable.Top has 3/8" hole reinforced with metal grommet to prevent pull off.Writable surface is abrasion resistant.Rigid plastic is flexible, yet will not readily break down over a wide temperature range.Ideal for indoor and outdoor temporary tagging applications.Flexible, yet durable - withstands stretching and ripping.Warranty: 30 days limited.High-strength rigid plastic tags suitable for use in tough industrial environments.Mar-resistant, matte surface is easy to write on with pen or marker.Complies with OSHA 29 CFR 1910.145 and ANSI Z535 requirements.ā WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov.Accuform SignsĀ® "EMERGENCY.." 5 3/4" x 3 1/4" RP-Plastic equipment status tag comes with 3/8" dia hole for easy fastening and provides a blank grid for writing the data, sold as 25 per pack.
Use labels to remind quality testing is to be maintained on equipment or product. Labels are easy to update, simply write-on dates and initials with pen..Dimensions: 1" x 2 1/4".Material: Pressure sensitive vinyl.Color: Green/white.27 labels/pack.Use labels to remind quality testing is to be maintained on equipment or product.Labels are easy to update, simply write-on dates and initials with pen.Adhesive Vinyl.Complies With All Safety Regulations.National Marker " Calibrated" Inspection label in green/white color measures 1" x 2 1/4" and is made of adhesive vinyl material for added durability.
Use labels to remind quality testing is to be maintained on equipment or product. Labels are easy to update, simply write-on dates and initials with pen..Dimensions: 1" x 2 1/4".Material: Pressure sensitive vinyl.Color: Blue/white.27 labels/pack.Use labels to remind quality testing is to be maintained on equipment or product.Labels are easy to update, simply write-on dates and initials with pen.Adhesive Vinyl.Complies With All Safety Regulations.National Marker " Tested" Inspection label in blue/white color measures 1" x 2 1/4" and is made of adhesive vinyl material for added durability.
Accuform SignsĀ® "OK TO USE" RP-Plastic status tag in white/black on red color measuring 5 3/4" x 3 1/4" has a thickness of 15 mil. Tag can resist water, chemical and includes signed by and date labels at the bottom, sold as 25 per pack..Size: 5 3/4"(L) x 3 1/4"(W).Material: RP-plastic.Legend: "OK TO USE".Package: 25/pack.Sign language: English.Flexible, yet durable - withstands stretching and ripping.Good for indoors and outdoors use, writable surface is abrasion resistant.High-strength rigid plastic tags suitable for use in tough industrial environments.Both sides of tag read, "OK TO USE" in large white letters with two blank lined areas at the bottom labeled "signed by" and "date".15-mil thick rigid plastic, relatively bendable.Mar-resistant, matte surface is easy to write on with pen or marker.Top has 3/8" hole reinforced with metal grommet.Certifications and standards: OSHA 29 CFR 1910.145 and ANSI Z535 requirements.Warranty: 30 days limited.Safety Tag.ā WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov.Accuform SignsĀ® "OK TO USE" 5 3/4" x 3 1/4" RP-Plastic status tag in white/black on red color has 3/8" hole for easy installation and approves the use of a machine or device with both side reading, sold as 25 per pack.
Use labels to remind quality testing is to be maintained on equipment or product. Labels are easy to update, simply write-on dates and initials with pen..Dimensions: 1" x 2 1/4".Material: Pressure sensitive vinyl.Color: Black/white.27 labels/pack.Use labels to remind quality testing is to be maintained on equipment or product.Labels are easy to update, simply write-on dates and initials with pen.Adhesive Vinyl.Complies With All Safety Regulations.National Marker " Calibrated" Inspection label in black/white color measures 1" x 2 1/4" and is made of adhesive vinyl material for added durability.
Tag that is part of inspection records..High-strength rigid plastic tags suitable for use in tough industrial environments.Mar-resistant, matte surface is easy to write on with pen or marker.Top has 3/8" hole reinforced with metal grommet.Complies with OSHA 29 CFR 1910.145 and ANSI Z535 requirements.Size: 5.75"(L) x 3.25"(W).Material: RP-plastic.Legend: "INSPECTION RECORD".Package: 25/pack.Sign language: English.Flexible, yet durable - withstands stretching and ripping.Good for indoors and outdoors use, writable surface is abrasion resistant.Tear resistant, weather resistant, and chemical resistant for dirty and greasy environments.ā WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov.Accuform SignsĀ® "INSPECTION REC.." 5.75" x 3.25" RP-Plastic status tag in black on white color features 0.375" dia hole for fastening and offers a reinforced metal grommet for longer wear, sold as 25 per pack.
Use labels to remind quality testing is to be maintained on equipment or product. Labels are easy to update, simply write-on dates and initials with pen..Dimensions: 1" x 2 1/4".Material: Pressure sensitive vinyl.Color: Green/white.27 labels/pack.Use labels to remind quality testing is to be maintained on equipment or product.Labels are easy to update, simply write-on dates and initials with pen.Adhesive Vinyl.Complies With All Safety Regulations.National Marker " Qa Approved" Inspection label in green/white color measures 1" x 2 1/4" and is made of adhesive vinyl material for added durability.
Accuform SignsĀ® "OK THIS.." PF-Cardstock scaffold status tag measuring 5 3/4" x 3 1/4" is made of 10 mil poly-based material. Tag features a 3/8" hole and is ideal for indoor use and short-term outdoor exposure, sold as 25 per pack..Size: 5 3/4"(L) x 3 1/4"(W).Material: PF-cardstock.Legend: "OK THIS SCAFFOLD HAS BEEN ERECTED TO MEET FEDERAL/STATE OSHA STANDARDS AND IS SAFE FOR ALL CRAFT WORK".Package: 25/pack.Sign language: English.Thin and flexible 10-mil poly-based material contains no wood based, paper content.Tear-resistant, waterproof matte surface is easy to write on with pen or marker, and will not crack, distort, or shrink.Top has 3/8" plain hole.Ideal for indoor use and short term outdoor exposure, scuff resistant matte surface is easy to write on.Front of tag reads, "OK this scaffold has been erected to meet federal/state OSHA standards and is safe for all craft work" followed by blank lined areas labeled "date," "competent person signature," and "comments".Green colored tag helps convey message.Certifications and standards: OSHA 29 CFR 1910.145 and ANSI Z535 requirements.Warranty: 30 days limited.Safety Tag.Accuform SignsĀ® "OK THIS.." 5 3/4" x 3 1/4" PF-Cardstock scaffold status tag in black on green color alert people about danger that occur in working on or around them, sold as 25 per pack.
Accuform SignsĀ® "FORKLIFT.." RP-Plastic status tag in black on yellow color measuring 5 3/4" x 3 1/4" is resistant to tear, weather and chemicals. Tag has matte surface and features a 3/8" hole with reinforced metal grommet, sold as 25 per pack..Size: 5 3/4"(L) x 3 1/4"(W).Legend: "FORKLIFT INSPECTION".Package: 25/pack.Sign language: English.Flexible, yet durable - withstands stretching and ripping.Good for indoors and outdoors use, writable surface is abrasion resistant.High-strength rigid plastic tags suitable for use in tough industrial environments.Tear resistant, weather resistant, and chemical resistant for dirty and greasy environments.15-mil thick rigid plastic, relatively bendable.Mar-resistant, matte surface is easy to write on with pen or marker.Top has 3/8" hole reinforced with metal grommet.Grommet: Metal.Certifications and standards: OSHA 29 CFR 1910.145 and ANSI Z535 requirements.Warranty: 30 days limited.Safety Tag.15-mil RP-Plastic.ā WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov.Accuform SignsĀ® "FORKLIFT.." 5 3/4" x 3 1/4" RP-Plastic status tag in black on yellow color is ideal for indoor, outdoor tagging applications and is made of 15-mil thick rigid material which is relatively bendable, sold as 25 per pack.
Accuform SignsĀ® 5 3/4" x 3 1/4" "FORKLIFT.." PF-Cardstock status tag has tear-resistant/waterproof matte surface for easy writing. Black on yellow tag enables end-to-end connection and includes perforations for easy removal..Size: 5 3/4"(L) x 3 1/4"(W).Material: PF-cardstock.Legend: "FORKLIFT INSPECTION".Package: 25/pack.Sign language: English.Thin and flexible 10-mil poly-based material contains no wood based, paper content.Tear-resistant, waterproof matte surface is easy to write on with pen or marker, and will not crack, distort, or shrink.Top has 3/8" plain hole.Ideal for indoor and short term outdoor conditions.Scuff resistant, matte surface.Certifications and standards: OSHA 29 CFR 1910.145 and ANSI Z535 requirements.Warranty: 30 days limited.Safety Tag.10-mil PF-Cardstock.Accuform SignsĀ® 5 3/4" x 3 1/4" "FORKLIFT.." PF-Cardstock status tag is made of pliable 10 mil crack/shrinks resistant poly-based material and is perfect for indoor/short-term outdoor conditions.
Accuform SignsĀ® 5.75" x 3.25" "INSPECTION REC.." PF-Cardstock status tag has tear-resistant/waterproof matte surface for easy writing. Black on white tag enables end-to-end connection and includes perforations for easy removal..Size: 5.75"(L) x 3.25"(W).Material: PF-cardstock.Legend: "INSPECTION RECORD".Package: 25/pack.Sign language: English.Thin and flexible 10-mil poly-based material contains no wood based, paper content.Tear-resistant, waterproof matte surface is easy to write on with pen or marker, and will not crack, distort, or shrink.Top has 0.375" plain hole.Ideal for indoor and short term outdoor conditions.Tags are connected end to end with perforations for easy removal.Intended for light-duty indoor or sheltered outdoor environments.0.010" stock has a temperature range of 0 to 150 deg F, resists UV rays for 3 - 6 months and has good chemical and scratch resistance.Certifications and standards: OSHA 29 CFR 1910.145 and ANSI Z535 requirements.Warranty: 30 days limited.Safety Tag.Complies with OSHA 29 CFR 1910.145 and ANSI Z535 requirements.Accuform SignsĀ® 5.75" x 3.25" "INSPECTION REC.." PF-Cardstock status tag is made of pliable 10 mil crack/shrinks resistant poly-based material and is perfect for indoor/short-term outdoor conditions.
Asset tagging is an effective way to record and monitor your company's valuable assets such as electronics, equipment, tools, furniture and containers. Avery(R) PermaTrack(R) Metallic Asset Tag Labels make it easy to create your own asset tags, barcode labels, equipment tags, property tags and nameplates on demand, right from your laser printer. Chemical resistant, waterproof and abrasion resistant, these metallic asset tags print smoothly without skewing, jamming, or static buildup that can cause shock. Use the free Avery(R) Design & Print software with barcode generator to add text, graphics, serialized numbers or barcodes in just a few steps. Then print as many asset tags as you need, when you need themāavoiding high minimum order quantities and long leads times from custom printing services. Avery(R) PermaTrack(R) Metallic Asset Tags are available in a variety of sizes, and feature a strong adhesive to enable reliable identification and tracking for the life span of your asset..Create your own heavy duty asset tags, barcode labels, equipment tags, property tags and nameplates with a laser printer.Accurately record and monitor valuable assets such as electronics, equipment, tools, furniture, containers and more.Print on demand and as many as you need, avoiding high minimum order quantities and long lead times.Labels feature a strong adhesive and the durable metallic material is chemical resistant, waterproof and abrasion resistant.Customize with text, graphics, serialized numbers and barcodes with the free Avery Design & Print software with barcode generator at avery.com/templates.Available in a variety of sizes.Asset tagging is an effective way to record and monitor your company's valuable assets such as electronics, equipment, tools, furniture and containers
Accuform SignsĀ® "OUT.." RP-Plastic status tag is made of 15 mil rigid material that is resistant to water and chemicals. Tag measuring 5 3/4" x 3 1/4" reads "Do Not Remove This Tag" and "See Other Side" at the back, sold as 25 per pack..Size: 5 3/4"(L) x 3 1/4"(W).Material: RP-plastic.Legend: "OUT OF SERVICE".Package: 25/pack.Sign language: English.Flexible, yet durable - withstands stretching and ripping.Good for indoors and outdoors use, writable surface is abrasion resistant.High-strength rigid plastic tags suitable for use in tough industrial environments.Both sides of tag have red and white "OUT OF SERVICE" logo for high visibility followed by a blank area for customization labeled "reason:".15-mil thick rigid plastic, relatively bendable.Mar-resistant, matte surface is easy to write on with pen or marker.Top has 3/8" hole reinforced with metal grommet.Back of tag also reads, "do not remove this tag" and "see other side".Certifications and standards: OSHA 29 CFR 1910.145 and ANSI Z535 requirements.Warranty: 30 days limited.Safety Tag.Complies with OSHA 29 CFR 1910.145 and ANSI Z535 requirements.ā WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov.Accuform SignsĀ® "OUT.." RP-Plastic status tag in red/black on white color features two blank lined areas at the bottom which reads "Signed By" and "Date" and has the logo written in red and white on both sides, sold as 25 per pack.
Use labels to remind quality testing is to be maintained on equipment or product. Labels are easy to update, simply write-on dates and initials with pen..Dimensions: 1" x 2 1/4".Material: Pressure sensitive vinyl.Color: Black/white.27 labels/pack.Use labels to remind quality testing is to be maintained on equipment or product.Labels are easy to update, simply write-on dates and initials with pen.Adhesive Vinyl.Complies With All Safety Regulations.National Marker " Inspected" Inspection label in black/white color measures 1" x 2 1/4" and is made of adhesive vinyl material for added durability.
Asset tagging is an effective way to record and monitor your company's valuable assets such as electronics, equipment, tools, furniture and containers. Avery(R) PermaTrack(R) Destructible Asset Tag Labels make it easy to create your own asset tags, barcode labels, equipment tags, property tags and nameplates on demand, right from your laser printer. Allow 24 hours for the labels to set, and when removal is attempted, these tamper-evident labels break apart in fragments and cannot be reapplied, discouraging theft, tampering or warranty fraud. Chemical resistant and waterproof, these asset tags print smoothly without skewing or jamming. Use the free Avery(R) Design & Print software with barcode generator to add text, graphics, serialized numbers or barcodes in just a few steps. Then print as many asset tags as you need, when you need themāavoiding high minimum order quantities and long leads times from custom printing services. Avery(R) PermaTrack(R) Destructible Asset Tags are available in a variety of sizes, and feature a strong adhesive to enable reliable identification and tracking for the life span of your asset..Create your own security asset tags, barcode labels, equipment tags, property tags and nameplates with a laser printer.Accurately record and monitor valuable assets such as electronics, equipment, tools, furniture, containers and more.Print on demand and as many as you need, avoiding high minimum order quantities and long lead times.Discourage theft or tamperingāafter allowing 24 hours for the label to set, when removal is attempted, labels break apart in fragments and cannot be reapplied.Durable material is chemical resistant and waterproof.Customize with text, graphics, serialized numbers and barcodes with the free Avery Design & Print software with barcode generator at avery.com/templates.Asset tagging is an effective way to record and monitor your company's valuable assets such as electronics, equipment, tools, furniture and containers.
Asset tagging is an effective way to record and monitor equipment, tools, electronics, furniture, containers and other valuable company assets. Avery(R) PermaTrack(R) White Asset Tag Labels make it easy to create your own barcode labels, asset tags, property and equipment tags on demand, right from your laser printer. Water resistant and tear resistant, these asset tags won't skew or jam when printing. Use the free Avery(R) Design & Print software with barcode generator to add barcodes, serialized numbers, text and graphics in just a few steps. Then print as many asset tags as you need, when you need themāavoiding high minimum order quantities and long leads times from custom printing services. Available in a variety of sizes, Avery(R) PermaTrack(R) Asset Tags feature a strong adhesive to enable reliable identification and tracking for the life span of your asset..Create your own light duty asset tags, barcode labels, equipment tags, property tags and nameplates with a laser printer.Accurately record and monitor valuable assets such as electronics, equipment, tools, furniture, containers and more.Print on demand and as many as you need, avoiding high minimum order quantities and long lead times.Durable material is water resistant and tear resistant.Customize with text, graphics, serialized numbers and barcodes with the free Avery Design & Print software with barcode generator at avery.com/templates.Available in a variety of sizes.Asset tagging is an effective way to record and monitor equipment, tools, electronics, furniture, containers and other valuable company assets.
National Marker "Danger Defective Equipment" Accident prevention tag warns on potential hazards and offers information on the job site. Tag includes self-locking nylon fasteners and complies with all safety regulations, sold as 25 per pack..Sold in 25 Packs.Without Grommets.Complies With All Safety Regulations.Warn off potential hazards and provide information on the job site. Tags sold in packs of 25 and includes self-locking nylon fasteners..National Marker "Danger Defective Equipment" Accident prevention tag measures 6" x 3" and is made of unrippable vinyl material for enhanced durability, sold as 25 per pack.
Accuform SignsĀ® "LADDER.." PF-Cardstock ladder status tag measuring 5 3/4" x 3 1/4" can resist tear, water as well as weather. Tag has matte surface which is easy to write on with pen or marker and thickness of 15 mil, sold as 25 per pack..Size: 5 3/4"(L) x 3 1/4"(W).Material: PF-cardstock.Legend: "LADDER INSPECTION".Package: 25/pack.Sign language: English.Thin and flexible 10-mil poly-based material contains no wood based, paper content.Tear-resistant, waterproof matte surface is easy to write on with pen or marker, and will not crack, distort, or shrink.Top has 3/8" plain hole.Ideal for indoor and short term outdoor conditions.Scuff resistant, matte surface.Certifications and standards: OSHA 29 CFR 1910.145 and ANSI Z535 requirements.Warranty: 30 days limited.Safety Tag.Accuform SignsĀ® "LADDER.." 5 3/4" x 3 1/4" PF-Cardstock ladder status tag in red/black on white color alerts people about the inherent dangers that exist in working environment and has 3/8" hole for easy installation, sold as 25 per pack.
Accuform SignsĀ® "SAFETY.." RP-Plastic status tag features a blank grid that has four columns with headers that read "Date", "By", "Date" and "By". 5 3/4" x 3 1/4" Tag has 3/8" hole for fastening with reinforced metal grommet, sold as 25 per pack..Size: 5 3/4"(L) x 3 1/4"(W).Material: RP-plastic.Legend: "SAFETY INSPECTION".Package: 25/pack.Sign language: English.Flexible, yet durable - withstands stretching and ripping.Good for indoors and outdoors use, writable surface is abrasion resistant.High-strength rigid plastic tags suitable for use in tough industrial environments.Front of tag reads, "SAFETY INSPECTION" followed by two blank lined areas labeled "equipment ID" and "location" and a blank grid for writing inspection data.15-mil thick rigid plastic, relatively bendable.Mar-resistant, matte surface is easy to write on with pen or marker.Top has 3/8" hole reinforced with metal grommet.Can be used to display last inspection date and inspection history.Certifications and standards: OSHA 29 CFR 1910.145 and ANSI Z535 requirements.Warranty: 30 days limited.Safety Tag.Complies with OSHA 29 CFR 1910.145 and ANSI Z535 requirements.ā WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov.Accuform SignsĀ® "SAFETY.." 5 3/4" x 3 1/4" RP-Plastic status tag in green on white color reads "safety inspection" followed by two blank lined areas with "location" in the front and is made of 15 mil rigid material, sold as 25 per pack.
Accuform SignsĀ® 5 3/4" x 3 1/4" "SAFETY.." PF-Cardstock status tag has tear-resistant/waterproof matte surface for easy writing. Green on white tag enables end-to-end connection and includes perforations for easy removal..Size: 5 3/4"(L) x 3 1/4"(W).Material: PF-cardstock.Legend: "SAFETY INSPECTION".Package: 25/pack.Sign language: English.Thin and flexible 10-mil poly-based material contains no wood based, paper content.Tear-resistant, waterproof matte surface is easy to write on with pen or marker, and will not crack, distort, or shrink.Top has 3/8" plain hole.Ideal for indoor and short term outdoor conditions.Front of tag reads, "SAFETY INSPECTION" followed by two blank lined areas labeled "equipment ID" and "location" and a blank grid for writing inspection data.Blank grid has four columns with headers that read "date," "by," "date," and "by," and continues on the back of tag.Can be used to display last inspection date and inspection history.Certifications and standards: OSHA 29 CFR 1910.145 and ANSI Z535 requirements.Warranty: 30 days limited.Safety Tag.10-mil PF-Cardstock.Accuform SignsĀ® 5 3/4" x 3 1/4" "SAFETY.." PF-Cardstock status tag is made of pliable 10 mil crack/shrinks resistant poly-based material and is perfect for indoor/short-term outdoor conditions.
Accuform SignsĀ® "OK THIS.." RP-Plastic scaffold status tag measuring 5 3/4" x 3 1/4" is flexible and durable to withstand stretching and ripping. Tag has abrasion resistant writable surface and is ideal for indoor or outdoor use..Size: 5 3/4"(L) x 3 1/4"(W).Material: RP-plastic.Legend: "OK THIS SCAFFOLD HAS BEEN ERECTED TO MEET FEDERAL/STATE OSHA STANDARDS AND IS SAFE FOR ALL CRAFT WORK".Package: 25/pack.Sign language: English.Flexible, yet durable - withstands stretching and ripping.Good for indoors and outdoors use, writable surface is abrasion resistant.High-strength rigid plastic tags suitable for use in tough industrial environments.Front of tag reads, "OK this scaffold has been erected to meet federal/state OSHA standards and is safe for all craft work" followed by blank lined areas labeled "date," "competent person signature," and "comments".15-mil thick rigid plastic, relatively bendable.Mar-resistant, matte surface is easy to write on with pen or marker.Top has 3/8" hole reinforced with metal grommet.Front of tag also reads, "do not alter".Certifications and standards: OSHA 29 CFR 1910.145 and ANSI Z535 requirements.Warranty: 30 days limited.Safety Tag.ā WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov.Accuform SignsĀ® "OK THIS.." 5 3/4" x 3 1/4" RP-Plastic scaffold status tag in black on green color alert people about dangers that occur in working on or around them, sold as 25 per pack.
Asset tagging is an effective way to record and monitor your company's valuable assets such as electronics, equipment, tools, furniture and containers. Avery(R) PermaTrack(R) Destructible Asset Tag Labels make it easy to create your own asset tags, barcode labels, equipment tags, property tags and nameplates on demand, right from your laser printer. Allow 24 hours for the labels to set, and when removal is attempted, these tamper-evident labels break apart in fragments and cannot be reapplied, discouraging theft, tampering or warranty fraud. Chemical resistant and waterproof, these asset tags print smoothly without skewing or jamming. Use the free Avery(R) Design & Print software with barcode generator to add text, graphics, serialized numbers or barcodes in just a few steps. Then print as many asset tags as you need, when you need themāavoiding high minimum order quantities and long leads times from custom printing services. Avery(R) PermaTrack(R) Destructible Asset Tags are available in a variety of sizes, and feature a strong adhesive to enable reliable identification and tracking for the life span of your asset..Create your own security asset tags, barcode labels, equipment tags, property tags and nameplates with a laser printer.Accurately record and monitor valuable assets such as electronics, equipment, tools, furniture, containers and more.Print on demand and as many as you need, avoiding high minimum order quantities and long lead times.Discourage theft or tamperingāafter allowing 24 hours for the label to set, when removal is attempted, labels break apart in fragments and cannot be reapplied.Durable material is chemical resistant and waterproof.Customize with text, graphics, serialized numbers and barcodes with the free Avery Design & Print software with barcode generator at avery.com/templates.Asset tagging is an effective way to record and monitor your company's valuable assets such as electronics, equipment, tools, furniture and containers.
Prevent accidental or unexpected startup or release of stored energy when working on equipment and machinery. Sold 25 per pack..Unrippable Vinyl.Complies With All Safety Regulations.OSHA Compliant.National Marker " Lockout Do Not Energize Equipment Lock Out" Lockout tag measures 6" x 3" and is made unrippable vinyl material for added durability.
Accuform SignsĀ® 5 3/4" x 3 1/4" "OK TO USE" PF-Cardstock status tag has tear-resistant/waterproof matte surface for easy writing. White/black on green tag enables end-to-end connection and includes perforations for easy removal..Size: 5 3/4"(L) x 3 1/4"(W).Material: PF-cardstock.Legend: "OK TO USE".Package: 25/pack.Sign language: English.Thin and flexible 10-mil poly-based material contains no wood based, paper content.Tear-resistant, waterproof matte surface is easy to write on with pen or marker, and will not crack, distort, or shrink.Top has 3/8" plain hole.Ideal for indoor and short term outdoor conditions.Both sides of tag read, "OK TO USE" in large white letters with two blank lined areas at the bottom labeled "signed by" and "date".Green colored tag helps convey message.Certifications and standards: OSHA 29 CFR 1910.145 and ANSI Z535 requirements.Warranty: 30 days limited.Safety Tag.10-mil PF-Cardstock.Accuform SignsĀ® 5 3/4" x 3 1/4" "OK TO USE" PF-Cardstock status tag is made of pliable 10 mil crack/shrinks resistant poly-based material and is perfect for indoor/short-term outdoor conditions.
Accuform SignsĀ® "DO NOT.." RP-Plastic status tag in white/black on red color measuring 5.75" x 3.25" has a thickness of 10 mil. Tag can resist water, chemical and includes signed by and date labels at the bottom, sold as 25 per pack..Size: 5.75"(L) x 3.25"(W).Legend: "DO NOT USE".Package: 25/pack.Sign language: English.Flexible, yet durable - withstands stretching and ripping.Good for indoors and outdoors use, writable surface is abrasion resistant.High-strength rigid plastic tags suitable for use in tough industrial environments.Both sides of tag read, "DO NOT USE" in large white letters with two blank lined areas at the bottom labeled "signed by" and "date".15-mil thick rigid plastic, relatively bendable.Mar-resistant, matte surface is easy to write on with pen or marker.Top has 0.375" hole reinforced with metal grommet.Certifications and standards: OSHA 29 CFR 1910.145 and ANSI Z535 requirements.Warranty: 30 days limited.Safety Tag.15-mil RP-Plastic.ā WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov.Accuform SignsĀ® "DO NOT.." 5.75" x 3.25" RP-Plastic status tag in white/black on red color has 0.375"Ā hole for easy installation and prohibits the use of a machine or device with both side reading, sold as 25 per pack.
Get your organization's chemical labeling in compliance with the Globally Harmonized system (GHS). Avery(R) UltraDuty(R) GHS chemical labels are specifically designed to withstand chemicals, abrasion, sun, water and extreme temperatures. They resist tearing and scuffing, and stand up to frequent use. With high-performance adhesive, the durable labels pass the BS5609 Protocol for 90-day seawater immersion. Ideal for labeling for drums, pails and totes. Easily customize and Print your required labels on demand using free Avery(R) design & Print online. Take advantage of our ready-to-use free templates, or design your GHS labels step-by-step with the Avery(R) GHS Wizard(R). Labels can be printed using standard sheet-fed laser printers. Customize labels with your company logo, lot numbers, barcodes or other information, and update as needed..Resistant to chemicals, abrasion, UV, water and extreme temperatures (BS5609 Sec. 2 certified - label remains adhered for at least 90 days in seawater).Works on metal, plastic, painted surfaces, fiber polycarbonate glass and more.Additional uses include safety signs, arc flash, tank, marine, equipment and outdoor work labels.Available in a variety of sizes for containers such as drums, pails, jugs, bottles, cans, flasks, jars, dropper bottles and beakers.Print on demand with free templates at avery.Com/GHS.Label drums, pails, jugs and bottles with this 500-pack of Avery UltraDuty GHS 8.5 x 11-inch waterproof UV-resistant chemical labels for laser printers.
Asset tagging is an effective way to record and monitor your company's valuable assets such as electronics, equipment, tools, furniture and containers. Avery(R) PermaTrack(R) Metallic Asset Tag Labels make it easy to create your own asset tags, barcode labels, equipment tags, property tags and nameplates on demand, right from your laser printer. Chemical resistant, waterproof and abrasion resistant, these metallic asset tags print smoothly without skewing, jamming, or static buildup that can cause shock. Use the free Avery(R) Design & Print software with barcode generator to add text, graphics, serialized numbers or barcodes in just a few steps. Then print as many asset tags as you need, when you need themāavoiding high minimum order quantities and long leads times from custom printing services. Avery(R) PermaTrack(R) Metallic Asset Tags are available in a variety of sizes, and feature a strong adhesive to enable reliable identification and tracking for the life span of your asset..Create your own heavy duty asset tags, barcode labels, equipment tags, property tags and nameplates with a laser printer.Accurately record and monitor valuable assets such as electronics, equipment, tools, furniture, containers and more.Print on demand and as many as you need, avoiding high minimum order quantities and long lead times.Labels feature a strong adhesive and the durable metallic material is chemical resistant, waterproof and abrasion resistant.Customize with text, graphics, serialized numbers and barcodes with the free Avery Design & Print software with barcode generator at avery.com/templates.Available in a variety of sizes.Asset tagging is an effective way to record and monitor your company's valuable assets such as electronics, equipment, tools, furniture and containers.
OSHA-compliant label with the pre-written phrase "DANGER LOCK OUT BEFORE WORKING ON EQUIPMENT."..004" thick Adhesive Vinyl.DANGER LOCK OUT BEFORE WORKING ON EQUIPMENT.Square corners and scored backing for quick peel-off and application.Printed matte surface with permanent acrylic adhesive.Moisture-resistant.Complies with OSHA 29 CFR 1910.145 and ANSI Z535 requirements.5/Pack.3Ā½" x 5"
Asset tagging is an effective way to record and monitor equipment, tools, electronics, furniture, containers and other valuable company assets. Avery(R) PermaTrack(R) White Asset Tag Labels make it easy to create your own barcode labels, asset tags, property and equipment tags on demand, right from your laser printer. Water resistant and tear resistant, these asset tags won't skew or jam when printing. Use the free Avery(R) Design & Print software with barcode generator to add barcodes, serialized numbers, text and graphics in just a few steps. Then print as many asset tags as you need, when you need themāavoiding high minimum order quantities and long leads times from custom printing services. Available in a variety of sizes, Avery(R) PermaTrack(R) Asset Tags feature a strong adhesive to enable reliable identification and tracking for the life span of your asset..Create your own light duty asset tags, barcode labels, equipment tags, property tags and nameplates with a laser printer.Accurately record and monitor valuable assets such as electronics, equipment, tools, furniture, containers and more.Print on demand and as many as you need, avoiding high minimum order quantities and long lead times.Durable material is water resistant and tear resistant.Customize with text, graphics, serialized numbers and barcodes with the free Avery Design & Print software with barcode generator at avery.com/templates.Available in a variety of sizes.Asset tagging is an effective way to record and monitor equipment, tools, electronics, furniture, containers and other valuable company assets.
Accuform SignsĀ® 5 3/4" x 3 1/4" "OUT.." PF-Cardstock status tag has tear-resistant/waterproof matte surface for easy writing. Red/black on white tag enables end-to-end connection and includes perforations for easy removal..Size: 5 3/4"(L) x 3 1/4"(W).Material: PF-cardstock.Legend: "OUT OF SERVICE".Package: 25/pack.Sign language: English.Tear-resistant, waterproof matte surface is easy to write on with pen or marker, and will not crack, distort, or shrink.Top has 3/8" plain hole.Ideal for indoor and short term outdoor conditions.Both sides of tag have red and white "OUT OF SERVICE" logo for high visibility followed by a blank area for customization labeled "reason:".Front of tag has two blank lined areas at the bottom labeled "signed by" and "date".Certifications and standards: OSHA 29 CFR 1910.145 and ANSI Z535 requirements.Warranty: 30 days limited.Safety Tag.10-mil PF-Cardstock.Thin and flexible 10-mil poly-based material contains no wood-based, paper content.Accuform SignsĀ® 5 3/4" x 3 1/4" "OUT.." PF-Cardstock status tag is made of pliable 10 mil crack/shrinks resistant poly-based material and is perfect for indoor/short-term outdoor conditions.
Accuform SignsĀ® "LADD.." RP-Plastic inspection & status tag is made of 15 mil rigid material and is easy to write on with pen or marker. Tag has four columns with headers that read "Date", "By", "Date" and "By", sold as 25 per pack..Package: 25/pack.Size: 5 3/4"(L) x 3 1/4"(W).High-strength rigid plastic tags suitable for use in tough industrial environments.Safety Tag.Mar-resistant, matte surface is easy to write on with pen or marker.15-mil thick rigid plastic, relatively bendable.Flexible, yet durable - withstands stretching and ripping.Sign language: English.Warranty: 30 days limited.Certifications and standards: OSHA 29 CFR 1910.145 and ANSI Z535 requirements.Top has 3/8" hole reinforced with metal grommet.Good for indoors and outdoors use, writable surface is abrasion resistant.Legend: "LADDER INSPECTION".Material: RP-plastic.ā WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov.Accuform SignsĀ® "LADD.." 5 3/4" x 3 1/4" RP-Plastic inspection & status tag in red on white color features a 3/8" hole reinforced with metal grommet and helps in alerting staffs to cautions, sold as 25 per pack.
OSHA-compliant tags with the pre-written phrase "DANGER EQUIPMENT LOCKED OUT.".6-1/4" x 3".10-mil PF-Cardstock.Pulp-free PF-Cardstock tags are tear-resistant and waterproof, with a mar-resistant, matte surface that is easy to write on with pen or marker.Top has oversized 3/8" plain hole.Complies with OSHA 29 CFR 1910.147 requirements.100/Roll.100 tags are housed inside an eye-catching, octagon-shaped cardboard dispenser. Tags are connected end-to-end with perforations for easy removal
Accuform SignsĀ® "LADDER.." RP-Plastic ladder status tag measuring 5 3/4" x 3 1/4" can resist tear, water as well as weather. Tag has matte surface which is easy to write on with pen or marker and has thickness of 15 mil, sold as 25 per pack..Size: 5 3/4"(L) x 3 1/4"(W).Material: RP-plastic.Legend: "LADDER INSPECTION".Package: 25/pack.Sign language: English.Flexible, yet durable - withstands stretching and ripping.Good for indoors and outdoors use, writable surface is abrasion resistant.High-strength rigid plastic tags suitable for use in tough industrial environments.Tear resistant, weather resistant, and chemical resistant for dirty and greasy environments.15-mil thick rigid plastic, relatively bendable.Mar-resistant, matte surface is easy to write on with pen or marker.Top has 3/8" hole reinforced with metal grommet.Grommet: Metal.Certifications and standards: OSHA 29 CFR 1910.145 and ANSI Z535 requirements.Warranty: 30 days limited.Safety Tag.ā WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov.Accuform SignsĀ® "LADDER.." 5 3/4" x 3 1/4" RP-Plastic ladder status tag in red/black on white color alerts people about the inherent dangers that exist in working environment and has 3/8" hole for easy installation, sold as 25 per pack.
Accuform SignsĀ® "DANGER DO NOT USE.." PF-Cardstock scaffold status tag measuring 5 3/4" x 3 1/4" includes 3/8" dia hole for easy fastening. Tag prevents machine operation or power activation during maintenance/repair, sold as 25 per pack..Size: 5 3/4"(L) x 3 1/4"(W).Legend: "DANGER DO NOT USE THIS SCAFFOLD KEEP OFF..".Package: 25/pack.Sign language: English.Top has 3/8" plain hole.Pulp-free no wood pulp or paper content unlike regular cardstock.Pliable, yet will not rip or breakdown in moisture.Do not tear readily when tugged on.Ideal for indoor use and short term outdoor exposure.Scuff-resistant matte surface is easy to write on.Warranty: 30 days limited.Safety Tag.DANGER DO NOT USE THIS SCAFFOLD KEEP OFF THIS SCAFFOLD IS BEING ERECTED, TAKEN DOWN OR HAS BEEN FOU.Thin and flexible 10-mil poly-based material contains no wood-based, paper content.Tear-resistant, waterproof matte surface is easy to write on with pen or marker, and will not crack, distort, or shrink.Complies with OSHA 29 CFR 1910.145 and ANSI Z535 requirements.Accuform SignsĀ® "DANGER DO NOT USE.." 5 3/4" x 3 1/4" PF-Cardstock scaffold status tag reduces workplace accidents by providing safety information and has red with black text for high visibility on one side, sold as 25 per pack.
Prevent accidental or unexpected startup or release of stored energy when working on equipment and machinery. Sold 25 per pack..Unrippable Vinyl.Complies With All Safety Regulations.OSHA Compliant.National Marker " Lockout Do Not Operate Equipment Locked Out" Safety sign measures 6" x 3" and is made unrippable vinyl material for added durability.
OSHA-compliant tags with the pre-written phrase "DANGER EQUIPMENT LOCKED OUT.".15-mil RP-Plastic.High-strength rigid plastic tags suitable for use in tough industrial environments.Mar-resistant, matte surface is easy to write on with pen or marker.Top has 3/8" hole reinforced with metal grommet.Complies with OSHA 29 CFR 1910.147 requirements.25/Pack.5Ā¾" x 3Ā¼".ā WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
OSHA-compliant tags with the pre-written phrase "DANGER EQUIPMENT LOCKED OUT.".6-1/4" x 3".10-mil PF-Cardstock.Tags are connected end-to-end with perforations for easy removal.Pulp-free PF-Cardstock tags are tear-resistant and waterproof, with a mar-resistant, matte surface that is easy to write on with pen or marker.Top has oversized 3/8" plain hole.Complies with OSHA 29 CFR 1910.147 requirements.250/Roll.250 tags are housed inside an eye-catching, octagon-shaped cardboard dispenser. Tags are connected end-to-end with perforations for easy removal
Prevent accidental or unexpected startup or release of stored energy when working on equipment and machinery. Sold 25 per pack..Sold in 25 Pack.Unrippable Vinyl.Complies With All Safety Regulations.OSHA Compliant.National Marker " Lockout Do Not Operate Equipment Locked Out " Safety sign measures 6" x 3" and is made unrippable vinyl material for added durability.
Prevent accidental or unexpected startup or release of stored energy when working on equipment and machinery. Sold 25 per pack..Unrippable Vinyl.Complies With All Safety Regulations.OSHA Compliant.National Marker " Equipment Lock Out A Life Is On The Line" Bilingual Lockout tag sign measures 6" x 3" and is made unrippable vinyl material for added durability.
Accuform SignsĀ® "DANGER DO NOT USE.." RP-Plastic scaffold status tag measuring 5 3/4" x 3 1/4" includes 3/8" dia hole for easy fastening. Tag prevents machine operation or power activation during maintenance/repair, sold as 25 per pack..Size: 5 3/4"(L) x 3 1/4"(W).15-mil rigid RP-plastic.Legend: "DANGER DO NOT USE THIS SCAFFOLD KEEP OFF..".Package: 25/pack.Sign language: English.High-strength plastic tags are water resistant to withstand weather conditions.Tear-resistant, weather-resistant and chemical resistant for dirty and greasy environments.Relatively bendable.Mar-resistant, matte surface.Top has 3/8" hole reinforced with metal grommet to prevent pull off.Writable surface is abrasion resistant.Rigid plastic is flexible, yet will not readily break down over a wide temperature range.Ideal for indoor and outdoor temporary tagging applications.Flexible, yet durable - withstands stretching and ripping.Warranty: 30 days limited.Safety Tag.DANGER DO NOT USE THIS SCAFFOLD KEEP OFF THIS SCAFFOLD IS BEING ERECTED, TAKEN DOWN OR HAS BEEN FOU.High-strength rigid plastic tags suitable for use in tough industrial environments.Mar-resistant, matte surface is easy to write on with pen or marker.Complies with OSHA 29 CFR 1910.145 and ANSI Z535 requirements.ā WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov.Accuform SignsĀ® "DANGER DO NOT USE.." 5 3/4" x 3 1/4" RP-Plastic scaffold status tag reduces workplace accidents by providing safety information and has red with black text for high visibility on one side, sold as 25 per pack.
Prevent accidental or unexpected startup or release of stored energy when working on equipment and machinery. Sold 10 per pack..Unrippable Vinyl.Complies With All Safety Regulations.OSHA Compliant.National Marker " Danger Do Not Operate Equipment Tag Out..." Lockout tag measures 6" x 3" and is made unrippable vinyl material for added durability.
Prevent accidental or unexpected startup or release of stored energy when working on equipment and machinery. Sold 10 per pack..Unrippable Vinyl.Complies With All Safety Regulations.OSHA Compliant.National Marker " Danger Equipment Locked Out..." Lockout tag measures 6" x 3" and is made unrippable vinyl material for added durability.
Accuform SignsĀ® 5 3/4" x 3 1/4" "DO NOT.." PF-Cardstock status tag has tear-resistant/waterproof matte surface for easy writing. White/black on red tag enables end-to-end connection and includes perforations for easy removal..Size: 5 3/4"(L) x 3 1/4"(W).Material: PF-cardstock.Legend: "DO NOT USE".Package: 25/pack.Sign language: English.Thin and flexible 10-mil poly-based material contains no wood based, paper content.Tear-resistant, waterproof matte surface is easy to write on with pen or marker, and will not crack, distort, or shrink.Top has 3/8" plain hole.Ideal for indoor and short term outdoor conditions.Both sides of tag read, "DO NOT USE" in large white letters with two blank lined areas at the bottom labeled "signed by" and "date".Red colored tag helps convey message to stop.Certifications and standards: OSHA 29 CFR 1910.145 and ANSI Z535 requirements.Warranty: 30 days limited.Safety Tag.Accuform SignsĀ® 5 3/4" x 3 1/4" "DO NOT.." PF-Cardstock status tag is made of pliable 10 mil crack/shrinks resistant poly-based material and is perfect for indoor/short-term outdoor conditions.
Prevent accidental or unexpected startup or release of stored energy when working on equipment and machinery. Sold 25 per pack..Unrippable Vinyl.Complies With All Safety Regulations.OSHA Compliant.National Marker " Danger Do Not Operate Equipment Lock Out" Bilingual Lockout tag measures 6" x 3" and is made unrippable vinyl material for added durability.
Prevent accidental or unexpected startup or release of stored energy when working on equipment and machinery. Sold 10 per pack..Unrippable Vinyl.Complies With All Safety Regulations.OSHA Compliant.National Marker " Danger Equipment Lock-Out..." Lockout tag measures 6" x 3" and is made unrippable vinyl material for added durability.
When confronted with challenging surfaces, use a label that's tougher and lasts longer than paper labels. DYMO LW Durable labels feature industrial-strength adhesive and a rugged coating that resists peeling and abrasion due to heat, moisture, and solvents. DYMO LW Durable labels are perfect for shelving, floor markers, chemical storage and more..Label shelves, warehouse inventory, chemical storage, floor markers, equipment, and more with these 2.32"W printer labels; yields up to 300 labels.Comes in white.Compatible with: DYMO LabelWriter 450, 450 Duo, 450 Turbo, 450 Twin Turbo, Wireless, 4XL, 550, 550 Turbo, 5XL.Adhesive backing for quick application.Water-resistant for durability.Tear-resistant for absolute safe keeping.Has great resistance against oil and chemicals.Moisture-resistant labels withstand temperatures from -18Ā° C to 50Ā° C
Prevent accidental or unexpected startup or release of stored energy when working on equipment and machinery. Sold 10 per pack..Unrippable Vinyl.Complies With All Safety Regulations.OSHA Compliant.National Marker " Danger Do Not Operate Equipment..." Bilingual Lockout tag measures 6" x 3" and is made unrippable vinyl material for added durability.